Accessories
40Pages

Accessories ■ Carrying elements ■ Clamping socket, receiving chucks ■ Magnets ■ Screws and threaded pins ■ Gauge strips and foil tapes ■ Casting resins and model resin ■ Locking agents and adhesives ■ High-performance lubricants

Note used for tightening the die set upper plate with the press ram; suitable for all die sets with thread in upper plate; plug diameters are in accordance with the standardised press plunger ram holes

Note Are screwed together with the die set upper plate; achieve more favourable guide rates with a large stroke due to the use of longer guide pillars

Note Suitable for all die sets with thread in upper plate Item number Material Steel 1.0503 (C45) Suitable for receiving chuck SZ4160;SZ4161 Item number SZ4129 Receiving chuckswith flange Material Note Steel 1.0503 (C45) Are screwed together with the die set upper plate Suitable for receiving chuck SZ4160;SZ4161 Item number

SZ4160 Receiving chuck with receiving chucks Note Receiving chucks with wobblers are used for the loose connection of the top part of a pillar guide tool with the press ram; plug diameters are in accordance with the standardised press plunger ram holes Suitable for receiving chucks SZ4125; SZ4129 d1f9 Item number

SZ4161 Receiving chuck blank Note Mounting blank with centring for individual rework Suitable for receiving chucks SZ4125; SZ4129 d1 Item number

Note Attention: Completely screw in the eye-bolt; must lie completely and evenly on the contact surface; must be positioned in order to avoid side drag; must be loaded in the direction of the eye-bolt

Material Steel 1.6541; forged Minimum screw-in length 1 x M in steel ; 1.25 x M in cast ; 2 x M in aluminium alloys; 2.5 x M in aluminium-magnesium alloys Note Attention: Completely screw in the eye-bolt; must lie completely and evenly on the contact surface; electromagnetic crack testing in accordance with DIN EN 1677-1; rotatable in screwed condition; not suitable for rotating under load; before mounting the lifting accessory, adjust to the direction of the force; rotatable by 360°; the integrated RFID transponder is used for the unique identification of the lifting accessory

Minimum screw-in length 1 x M in steel ; 1.25 x M in cast ; 2 x M in aluminium alloys; 2.5 x M in aluminium-magnesium alloys Attention: Completely screw in the side-load hoist ring; must lie completely and evenly on the contact surface; the side-load hoist ring is collapsible, rotatable through 360 degrees from all directions and carries the full load in the pulling direction; before mounting the lifting accessory, adjust to the direction of the force; the supplied screw is crack tested; the integrated RFID transponder is used for the unique identification of the lifting accessory M Load...

SZ4351 Carrying screw with thread Note Lateral screwing in on the part; arrange 4 carrying screws on the part; the load can be distributed over 2 carrying screws when turning the part Tool weight kgmax. Item number

Note Fixing via hexagon socket screws (included in the scope of delivery); arrange 4 carrying screws on the part; the load Steel 1.°5°3 (C45) can be distributed over 2 carrying screws when turning the part; hob the lifting lugs into the tool part; lifting lugs from d,= 63 mm have 4 screws Scope of supply SZ8510 d1 d2 l abcefgh Tool weight Item number

Note Strength class 12.9 with hardened ball; ball flattened and movably mounted up to 9°; for the clamping of surfaces that are not plane-parallel Ball 0 l b Item number

Note Strength class 12.9 with hardened ball; ball flattened and movably mounted up to 9°; for the clamping of surfaces that are not plane-parallel

Installation in mounting bore ISO H7 Material Tool steel; hardened d1g6 Item number Item number

DIN 6321 Shape B Material Tool steel; hardened Hardness 56 ±2 HRC Installation in mounting bore ISO H7

Note Ball flattened and movably mounted up to 9°; ball, hardened; for the clamping of surfaces that are not plane-parallel; mounting body tempered l, *0-02 l2 Ball 0 Item number

DIN EN ISO 4762 Note Strength class 8.8 d1 d2 k l b Standard packaging Item number d1 d2 k l b Standard packaging Item number

DIN EN ISO 4762 Note Strength class 12.9 d1 d2 k l b Standard packaging Item number d1 d2 k l b Standard packaging Item number

Note Strength class 8.8 di d2 k l b Standard packaging Item number

Note Strength class 149 d1 SW l Standard packaging Item number

SZ9335 Holding magnet round Installation instruction press in, shrink in or stick in; the holding magnets can be shortened by the dimension l2 without reducing the adhesive force; the adhesive surface must not be reduced by more than 2 mm, otherwise the adhesive force would be significantly reduced Note Screened system Item number

Installation instruction Note

DIN EN ISO 8734 Material Tool steel; Chrome-Vanadium alloyed Hardness 60 ±2 HRC Note Hardened, tempered, super-finished to m6; spherical cap and chamfer polished d1m6 Standard packaging l Item number

DIN EN ISO 8735 Material Tool steel; Chrome-Vanadium alloyed Hardness 60 ±2 HRC Application With blind-end bores if the drive-out of the pin from the rear side is not possible Note Hardened, tempered, super-finished to m6; with air leakage surface

Material Steel

Material Steel

The high-performance oil with molybdenum disulphide (MoS2) additive is especially well suited for highly stressed narrow dynamic seatings due to its viscosity and composition. The molybdenum additive has a friction-relieving effect, and creates a bearing armouring with excellent dry-running properties. Application field Filling quantity sliding guides, etc. Item number SZ9850 Modern demulsifying slideway oil with excellent anti-stick and slip properties to lubricate metal and plastic sliding guides, slideways with solid lubrication as well as ball and roller guides. It is also suitable as a...

Performance optimised long-term lubricating grease, highest anti-corrosion protection, best water resistance and high viscosity properties. Temperature range -30 °C to 120 °C Suitable greas gun SZ9810 Filling quantity kg Item number SZ9005 Roller bearing grease Superior wear protection, good temperature resistance up to 140 °C, best water and medium resistance, good anti-corrosion protection and very good durability. Application field Lubrication of ball and roller guides