ESS 076 DC 24 V, 10-link, 4-20 mA > Measures AC current up to 100 A > Internal processing of measured values contactless > Analog & digital interface in one device The Smart Sensor Current ESS 076 measures the AC current of the conducted lines without contact. Acquired measurement data is output analog (4-20 mA signal) or digital (IO-Link). Measured and processed data- such as power and energy - are provided via the IO-Link interface to higher-level systems such as machine controllers or edge computers for condition monitoring. The ESS 076 is ideal for the permanent collection of load profiles from plants and machines. These help in applications such as peak load detection to achieve savings in energy costs. @ IO-Link C€ca TECHNISCHE DATEN Measuring signal 4 - 20 mA Measuring signal IO-Link Loop resistor (external) Connection Electrical protection Mounting Casing Dimensions Weight Fitting position Storage temperature Operating/Storage humidity Protection type/Protection class Approvals Note Accessories Current Current, event data, diagnostic data, device data, calculated energy and power < 500 H (only for 4-20 mA) Round plug connector M12, IEC 61076-2-101, 4-pin, A-coded Reverse-polarity, short circuit, overvoltage protection Clip for 35 mm DIN rail, EN 60715 plastic according to UL94 V-0, light grey 87 x 35 x 46,5 mm ~ 100 g any -40 to +85 °C (-40 to +185 °F) < 90 % rF (non-condensing) IP40 / III (extra-low voltage) IEC 61010-1/DIN EN 61010-1 DIN IEC 60381-2 Conductor diameter < 11,4 mm, VDE and UL certification prepeared Screw mounting STEGOFIX PLUS SFP 095 Art. No. 09550.0-05 Adhesive mounting STEGOFIX PLUS SFP 095 Art. No. 09550.1-05 Magnetic fixing STEGOFIX PLUS SFP 095 Art. No. 09550.2-05 1 Tolerance data measured at nominal voltage DC 24 V.