Steelex International Ltd. Shot Blasting Machine - Model 8W - 2.5 x 1.5 www.steelexnetwork.com Phone : +442081233824 Fax : +442071171993 E-mail : [email protected] Web : www.steelexinternational.net S teelex International Ltd. manufactures large capacity blasting machines for blasting structural steel. These machines are designed for general fabricators and manufacturers of pre-engineered buildings. The large capacity enables a range of different components to be cleaned and the blast wheels are mounted on a compound angle to give positive cleaning to the end faces of fabricated components. The machine has twin elevators that allows a low overall height to allow installation in fabrication shops with over head cranes. Specification Maximum Beam Size : 1500 mm Maximum Plate Width : 2500 mm Maximum Length : 12000 mm Blast Wheels : 8 Blast Wheel Power : 22 kW Power Required : 253 kW Passline Height : 1000mm Conveyor Speed m/min : 0.5 to 5 Dust Collector Size : 16000 CFM Floor Space Required : 8m x 40m Maximum Height : 6.5m Initial Fill of Abrasive : 8000 kgs PRODUCTION DATA Estimated Abrasive Consumption : 54 kgs per hour Estimated Production SA 2.5 : 125 - 150 m sq. per hour Estimated Line Speed SA 2.5 : 1.5 linear m / min Production data assumes condition “B” steel and is dependent on the material size A range of optional equipment is available with the machines that includes abrasive blow off unit and cross transfer tables to load and unload material. Steelex can offer this machine complete or in a kit basis to allow the fabrication to be done locally. We also offer smaller Blast Machines, Automatic Painting Machines and Material Handling Systems. Please contact us for more information Copyright Steelex International Ltd All rights reserved