Steelex International Ltd. Shot Blasting Machine - Model 8W - 1.5 x 2.0 www.steelexnetwork.com Phone : +442081233824 Fax : +442071171993 E-mail : [email protected] Web : www.steelexinternational.net The Steelex 8W - 1.5 x 2.0 is a heavy duty blasting machine built for fabricators of heavy structural steel column and beam fabrications. All the blast wheels are angled to give the same level of cleanliness on the end plates as on the web and flange. The machine is very flexible and will blast smaller section sizes in multiples and also pipes up to 1500mm diameter. A PLC control system gives a single button start up and shut down of the machine with full monitoring. Specification Maximum Height : 2000 mm Maximum Width : 1500 mm Maximum Length : Dependant on conveyor Blast Wheels : 8 Blast Wheel Power : 18.5 kW Power Required : 250 kW Passline Height : 1000mm Conveyor Speed m/min : 0.5 to 10 Dust Collector Size : 14000 CFM Floor Space Required : 6m x 40m Maximum Height : 7.5m Initial Fill of Abrasive : 10000 kgs PRODUCTION DATA Est Abrasive Consumption : 45 kgs per hour Estimated Production SA 2.5 : 200 - 300 m sq. per hour Estimated Line Speed SA 2.5 : 0.8 – 1.2 linear m / min Production data assumes condition “B” steel and is dependent on the material As standard the machine is supplied with roller conveyors with a 1000kgs/m capacity and if required we can supply conveyors for up to 3000kgs/m. To optimize efficiency four, six or eight blast wheels can blast at any one time dependant on the material size being processed by manual controls for the abrasive flow. We can also offer cross transfer tables for loading and unloading and a high pressure blow off unit on this machine. Please contact us for further information. Copyright Steelex International Ltd All rights reserved