Steelex International Ltd. Shot Blasting Machine - Model 6W - 0.75 x 1.85 www.steelexnetwork.com Phone : +442081233824 Fax : +442071171993 E-mail : [email protected] Web : www.steelexinternational.net Steelex International Ltd. manufactures high production blasting machines for blasting structural steel. These machines are designed for general fabricators and manufacturers of preengineered buildings. The machines are designed for stand alone or flow line installation for blasting beams in the “I” position up to 1800 mm high. The bottom of the blast cabinet is opened out to allow 2000 mm wide plate to be cleaned prior to fabrication. Specification Maximum Beam Size : 1800 mm Maximum Beam Width : 750 mm Maximum Length : 15000 mm Blast Wheels : 6 Blast Wheel Power : 18.5 kW Power Required : 155 kW Passline Height : 1250mm Conveyor Speed : 0.5 to 5 m / min Dust Collector Size : 10000 CFM Floor Space Required : 7m x 40m Maximum Height : 6.5m Initial Fill of Abrasive : 6000 kgs PRODUCTION DATA Estimated Abrasive Consumption : 34 kgs per hour Estimated Production SA 2.5 : 100 - 125 m sq. per hour Estimated Line Speed SA 2.5 : 2.0 linear m / min Production data assumes condition “B” steel and is dependent on the material size A range of optional equipment is available with the machines that includes abrasive blow off units, cross transfer tables to load and unload material and automated painting equipment with drying ovens. Steelex can offer this machine complete or in a kit basis to allow the fabrication to be done locally. We also offer larger Blast Machines, Automatic Painting Machines and Material Handling Systems. Please contact us for more information Copyright Steelex International Ltd All rights reserved