Steelex International Ltd. Shot Blasting Machine - Model 4W - 1.5 x 1.0 (C) www.steelexnetwork.com Phone : +442081233824 Fax : +442071171993 E-mail : [email protected] Web : www.steelexinternational.net Steelex International Ltd as developed a range of shot blasting machines that are built into a series of sea containers to enable the rapid installation of the unit in a factory or on a construction site. These machines are ideal for a painting contractor and can be moved from job site to job site with ease. For a steel fabricator with multiple sites this unit can be easily moved as production dictates elimination costly transport and damage to the painted products A simple series of concrete pads is all that needed for the foundation and no pit is required. Please contact us for further information on this machine and the other sizes available in the range. Specification Maximum Beam Size : 910 mm Maximum Plate Width : 1500 mm Maximum Length : 12000 mm Maximum Pipe Dia. : 914.4 mm Blast Wheels : 4 Blast Wheel Power : 18.5 kW Power Required : 100 kW Passline Height : 1250mm (Pitless) Conveyor Speed : 0.5 to 5 m / min Dust Collector Size : 8000 CFM Floor Space Required : 6m x 30m Maximum Height : 6.0m Initial Fill of Abrasive : 4000 kgs PRODUCTION DATA Estimated Abrasive Consumption :18 kgs per hour Estimated Production SA 2.5 : 50 - 70 m sq. per hour Estimated Line Speed SA 2.5 : 0.8 to 1.0 linear m / min Production data assumes condition “B” steel and is dependent on the material size This blast machine is fitted with the Steelex Direct Drive Blast Wheel that has machined and hardened wheel blades for extra long life and when combined with the 27% Chrome Alloy cast wheel parts leads to lower running costs and machine down time. Copyright Steelex Central Asia Ltd All rights reserved