Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Steel Smith
  3. Swivel feet
video corpo

Swivel feet

Swivel feet
1 / 55 PagesView full catalog

Swivel feet

Product catalog summary
Overview: This document provides comprehensive technical information on KIPP swivel pads and feet, focusing on their modular design, assembly procedures, and vibration absorption capabilities. It details specifications for components such as threaded spindles, ball joints, and plates made from various materials.
Specifications:
  • Swivel Pads: Feature a modular design allowing combination with threaded spindles or ball joints. Minimum height is 22.5 mm.
  • Threaded Spindles: Available in steel or stainless steel, with different lengths and load capacities. Surface finishes include blue chromated for steel and natural for stainless steel.
  • Ball Joints: Designed with internal threads, available in steel or stainless steel, with specific weight and dimensions.
  • Plates: Made from thermoplastic, die cast zinc, or stainless steel, with anti-slip options. Load capacities vary by material and form.
Assembly Procedures:
  • Components can be assembled using a plastic hammer to fit the ball joint or spindle into the plate.
  • Fastening holes in plates can be opened if needed for securing to a base.
  • For assembled orders, add "assembled" to the order number.
Vibration Absorption:
  • Swivel pads with vibration absorbers are designed to reduce interference frequencies, enhancing stability.
  • Optimal pressure for absorption is ≤ 0.4 N/mm², with a maximum of 0.6 N/mm².
  • Natural frequency and interference frequency differences determine absorption effectiveness.
Ordering Information:
  • Sample orders are provided for clarity, indicating how to specify assembled components.
  • Material options and surface finishes are detailed for each component type.
Recommendations:
  • Use specified load capacities as guidelines for permanent static loads to ensure optimal absorption properties.
  • Consider the modular design for flexibility in application across different machines and installations.
Technical Information:
  • Inclination Angle: The threaded spindle has an inclination angle to accommodate various applications.
  • Height Calculation: The total height of a swivel foot is the length of the threaded spindle plus 30 mm.
Key Data from Tables:
  • Load capacities and dimensions for various components are provided, with specific order numbers for easy reference.
  • Material and surface finish details are specified for each component type.
Material Specifications:
Metal parts are made of galvanized steel with a strength of 5.6. Elastomer components are composed of natural rubber with hardness options of 40° or 60° Shore A.
Cap Elements:
These elements are highly elastic in both radial and axial directions, providing excellent impact isolation. They are designed to isolate sound and vibrations in machines and assemblies with low natural frequencies, making them suitable for sensitive instruments and small devices. They should not be subjected to tensile stress and are temperature resistant from -30°C to +80°C.
Screw-in Plugs:
Made from glass-fibre reinforced thermoplastic with a brass threaded insert, these plugs are used for mounting swivel feet and pads to square tubes. They are available in various sizes and load capacities, with a black finish and nickel-plated inserts.
Height-adjustable Equipment Feet:
These are suitable for tables and lighter installations, allowing height adjustment by turning a nut. They can be mounted on aluminum profiles without drilling, using a T-slot nut.
Swivel Pads and Feet:
Swivel pads are made from case-hardened steel with a black oxide finish, designed to absorb vibrations and prevent slipping. Swivel feet are available in various forms and materials, including stainless steel and POM, with anti-slip plates for vibration absorption.
Grub Screws and Thrust Pads:
Grub screws with ball thrust points are used with thrust pads, available in steel or plastic. They are finished with a black oxide coating and are suitable for various applications.
Contact Information:
Heinrich Kipp Werk KG, Postfach 11 60, DE-72168 Sulz a.N., Tel.: +49 (0) 7454 793-0, Fax: +49 (0) 7454 793-33, Email: [email protected], [email protected], Website: www.kipp.com
See more

Catalog excerpts

Swivel feet-1

Swivel feet

 Open the catalog to page 1
Swivel feet-2

Technical Information for swivel pads Modular structure of a swivel pad Application: Swivel pads are of modular design. The components can be individually combined to match the application. The swivel pads are applicable for use on machines, installations and even office furniture. Modular design: Swivel pads consist of two components - a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint (see fig. 1). Height of swivel pad: Swivel pads always have a minimum height of H = 22.5 mm independently of the plate or threaded spindle or ball joint...

 Open the catalog to page 2
Swivel feet-3

Threaded spindles for swivel pads in steel or stainless steel Material: Steel or stainless steel 1.4301. Surface finish: Steel blue chromated. Stainless steel, natural finish. KIPP Threaded spindles for swivel pads Order No. Order No. D L L1 SW Load capacity Approx. steel stainless steel max. kN weight Sample order: K0421.060151 K0421.060151 and K0415.1030 assembled Note for ordering: If the threaded spindle and the swivel pad plate are to be supplied assembled, please add the suffix „assembled“ to the order number for the spindle and plate. (e.g. K0421.060151 and K0415.1030 assembled.)...

 Open the catalog to page 3
Swivel feet-4

Ball joints with internal thread Material: Steel or stainless steel 1.4301. Surface finish: Steel blue chromated. Stainless steel, natural finish. Sample order: K0422.061 K0422.061 and K0415.1030 assembled Note for ordering: If the ball joint and the swivel pad plate are to be supplied assembled, please add the suffix „assembled“ to the order number for the ball joint and plate. (e.g. K0422.061 and K0415.1030 assembled.) Note: For direct fastening of swivel pads by standard screws. Swivel pads consist of a ball joint and a plate. Any ball joint can be combined with any plate. The height of the...

 Open the catalog to page 4
Swivel feet-5

Form A without fastening holes without anti-slip plate Form B without fastening holes with anti-slip plate Plates, thermoplastic, glass-fibre reinforced. Anti-slip-plate in thermoplastic elastomer. Surface finish: Black. Sample order: K0415.1030 K0415.1030 and K0421.060151 assembled Form C with fastening holes (closed) without anti-slip plate Form D with fastening holes (closed) with anti-slip plate Note for ordering: If the swivel pad plate and the threaded spindle or ball joint are to be supplied assembled, please add the suffix „assembled“ to the order number for the plate and the spindle...

 Open the catalog to page 5
Swivel feet-6

Plates for swivel pads in die cast zinc or stainless steel without fastening holes without fastening holes without anti-slip plate with anti-slip plate Form C with fastening holes (open) without anti-slip plate Form D with fastening holes (open) with anti-slip plate Material: Plate in die cast zinc or stainless steel 1.4305. Anti-slip-plate in thermoplastic elastomer. Surface finish: Plate in die cast zinc, black powder-coated. Plate in stainless steel, natural finish. Sample order: K0416.10301 K0416.10301 and K0421.060151 assembled Note for ordering: If the swivel pad plate and the threaded...

 Open the catalog to page 6
Swivel feet-7

Plates for swivel pads in die cast zinc or stainless steel KIPP Plates for swivel pads in die cast zinc Order No. Order No. D KIPP Plates for swivel pads in stainless steel Order No. Order No. D Order No. Order No. D A Load capacity Form C Form D max. kN

 Open the catalog to page 7
Swivel feet-8

Form C with fastening hole without anti-slip plate Form D with fastening hole with anti-slip plate Material: Plates, thermoplastic, glass-fibre reinforced. Anti-slip-plate in thermoplastic elastomer. Surface finish: Black. Sample order: K0654.1030 K0654.1030 and K0421.060151 assembled Note for ordering: If the swivel pad plate and the threaded spindle or the ball joint are to be supplied assembled, please add the suffix „assembled“ to the order number for the plate and the spindle or the ball joint. (e.g. K0654.30803 and K0421.060151 assembled.) Note: Swivel pads consist of a plate and a threaded...

 Open the catalog to page 8
Swivel feet-9

Form C with fastening hole without anti-slip plate Material: Plate in die cast zinc. Anti-slip-plate in thermoplastic elastomer. Surface finish: Plate black powder-coated. Sample order: K0417.30801 K0417.30801 and K0421.060151 assembled Note for ordering: If the swivel pad plate and the threaded spindle or the ball joint are to be supplied assembled, please add the suffix „assembled“ to the order number for the plate and the spindle or the ball joint. (e.g. K0417.30801 and K0421.060151 assembled.) Form D with fastening hole with anti-slip plate Note: Swivel pads consist of a plate and a threaded...

 Open the catalog to page 9
Swivel feet-10

Material: Plates, stainless steel 1.4301. Core, thermoplastic PA. Rubber support TPE. Surface finish: Plate natural finish. Light grey rubber support with sealing lip, hardness 70 Shore A. Range of use from -20 °C to +100 °C. Sample order: K0418.1060 K0418.1060 and K0421.060152 assembled Note for ordering: If the swivel pad plate and the threaded spindle or the ball joint are to be supplied assembled, please add the suffix „assembled“ to the order number for the plate and the spindle or the ball joint. (e.g. K0418.1060 and K0421.060152 assembled.) Note: The rubber support is joint together with...

 Open the catalog to page 10
Swivel feet-12

Technical information for swivel pads and swivel feet with vibration absorption Natural frequency: Every sprung weight, such as a machine or piece of equipment, that is standing on swivel pads with vibration absorbers vibrates after an initial impetus at its own natural frequency (resonance frequency). In the diagram to the side (fig. 1) the natural frequency of Sylomer V12 under pressure by various forces can be read. The optimum range of use is with a pressure of ≤ 0.4 N/mm2. A maximum pressure of 0.6 N/mm2 should not be exceeded. Interference frequency: The frequency emitted by a machine or...

 Open the catalog to page 12
Swivel feet-13

with vibration absorption Material: Plate in die cast zinc or stainless steel 1.4305. Damper plate PUR elastomere (Sylomer V12). Surface finish: Plate in die cast zinc, black powder-coated. Plate in stainless steel, natural finish. Damper plate grey, fixed, cannot slip. Range of use from -30 °C to +70 °C. Sample order: K0419.20601 K0419.20601 and K0421.060151 assembled Note for ordering: If the swivel pad plate and the threaded spindle or the ball joint are to be supplied assembled, please add the suffix „assembled“ to the order number for the plate and the spindle or the ball joint. (e.g. K0419.20601...

 Open the catalog to page 13

All Steel Smith catalogs and technical brochures

  1. CP720 flex locators
    CP720 flex locators

    1  Page

  2. CP725
    CP725

    1  Page

  3. CP725-P FLEX LOCATORS (PROTECTING COVERS
    CP725-P FLEX LOCATORS (PROTECTING COVERS

    1  Page

  4. QCTH,QCTHL Quarter-turn clamps
    QCTH,QCTHL Quarter-turn clamps

    4  Pages

  5. QCBUS,QCBU Button-locking pins
    QCBUS,QCBU Button-locking pins

    5  Pages

  6. BALL-LOCK CLAMPING PINS
    BALL-LOCK CLAMPING PINS

    4  Pages

  7. magnet-lock clamping receptacles
    magnet-lock clamping receptacles

    4  Pages

  8. magnet-lock clamping pins
    magnet-lock clamping pins

    4  Pages

  9. sliding locks for slotted hole
    sliding locks for slotted hole

    4  Pages

  10. Sliding locks for square bar
    Sliding locks for square bar

    4  Pages

  11. QCWE KNOB-LOCKING CLAMPS
    QCWE KNOB-LOCKING CLAMPS

    4  Pages

  12. Clamping levers, tension levers, cam levers
    Clamping levers, tension levers, cam levers

    65  Pages

  13. Handles, knobs
    Handles, knobs

    73  Pages

  14. Stirrup-shaped handles, machine handles, apparatus handles
    Stirrup-shaped handles, machine handles, apparatus handles

    55  Pages

  15. Handwheels, handles, position indicators
    Handwheels, handles, position indicators

    55  Pages

  16. Hinges
    Hinges

    21  Pages

  17. Spring plungers, locking bolts, ball locking bolts
    Spring plungers, locking bolts, ball locking bolts

    123  Pages

  18. Compression latches
    Compression latches

    17  Pages

  19. Support elements, locating elements, stop elements
    Support elements, locating elements, stop elements

    77  Pages

  20. CP104 TOE CLAMPS
    CP104 TOE CLAMPS

    1  Page

  21. SIDE CLAMPS
    SIDE CLAMPS

    1  Page

  22. TOE CLAMPS
    TOE CLAMPS

    1  Page

  23. HOOK CLAMPS
    HOOK CLAMPS

    2  Pages

  24. HOOK-CLAMP ASSEMBLIES
    HOOK-CLAMP ASSEMBLIES

    2  Pages

  25. Steelsmith clamps 2017
    Steelsmith clamps 2017

    2  Pages

  26. Automotive Clamps
    Automotive Clamps

    1  Page

  27. 787:clamping devices
    787:clamping devices

    1  Page

  28. 6135-B:clamping devices
    6135-B:clamping devices

    1  Page

  29. collar nuts DIN-6331:fixture elements
    collar nuts DIN-6331:fixture elements

    1  Page

  30. Swing Clamps
    Swing Clamps

    6  Pages

  31. Pneumatic Clamps
    Pneumatic Clamps

    12  Pages

  32. Clamping Devices
    Clamping Devices

    4  Pages

  33. Leveling Pads (Fixture Elements)
    Leveling Pads (Fixture Elements)

    3  Pages

  34. Accessories
    Accessories

    4  Pages

  35. Additional Locking Mechanism
    Additional Locking Mechanism

    6  Pages

  36. Automotive Clamps
    Automotive Clamps

    16  Pages

  37. Squeeze Action Clamps
    Squeeze Action Clamps

    7  Pages

  38. Pull Action Clamps
    Pull Action Clamps

    7  Pages

  39. Straight Line Action
    Straight Line Action

    7  Pages

  40. Pull Back Clamps
    Pull Back Clamps

    2  Pages

  41. Horizontal Hold Down Action
    Horizontal Hold Down Action

    6  Pages

  42. Cam Clamps
    Cam Clamps

    1  Page

  43. VTC Series Medium Duty Clamps - Front Mounting
    VTC Series Medium Duty Clamps - Front Mounting

    1  Page

  44. VTC - Series Medium Duty Clamps - Straight Base
    VTC - Series Medium Duty Clamps - Straight Base

    6  Pages

  45. Vertical Hold Down Action - Flanged Base
    Vertical Hold Down Action - Flanged Base

    7  Pages

  46. Leveling pads
    Leveling pads

    1  Page

  47. Fixture elements
    Fixture elements

    1  Page

  48. Shimpacks
    Shimpacks

    2  Pages

  49. Straight line action
    Straight line action

    1  Page

  50. Spindles
    Spindles

    2  Pages

Archived catalogs

  1. VTC Series Heavy Duty Clamps
    VTC Series Heavy Duty Clamps

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.