RcsHSIsus MAGNET-LOCK CLAMPING RECEPTACLES Part Number Related Product Page Separately Sold | Nut (Stainless Steel) MAGNET-LOCK CLAMPING PINS Body/Stud Steel(S45C) Electroless nickel plated Part Number

Technical Information ・Heat resistance : up to 80℃ ・Mechanical Strength Clamping Force 7N Magnet The magnet pulls in the clamping pin. Application Example Installation/removal of maintenance cover plate of machines Magnet-Lock Clamping Receptacle QCMA0612A

Installation Instructions for Magnet-Lock Clamping Receptacles For installation in a subplate of thickness ranging from 6mm to 10mm, use a nut for fastening. For installation in a subplate of thickness over 10mm, use a screw-in method. φ16 +0.10 +0.05 Installation in a subplate M12X1.5 （Fine Threads） M12X1.5 Installation in a block （Fine Threads） Installation Instructions for Magnet-Lock Clamping Pins For installation in a subplate of thickness ranging from 2mm to 6mm, use a nut for fastening. Nut φ14 （Not available from Imao） 2 Nut （Not available from Imao） φ4+0.1 0 Installation in a plate of...

Fixture Plate Machining Accuracy Spacing Tolerance ±0.1 Repeatability Repeatability of ±0.25 can be maintained Locating Pin / (Round) Spacing tolerance on both the fixture For highly accurate locationg, plate and the subplate should be ±0.1. use locating pins.