Specifications:
The document provides detailed specifications for FLEX LOCATORS, specifically tapered receiver bushings. Key dimensions include mounting hole dimensions, part numbers, and lifting force values. The lifting force, measured in Newtons (N), ranges from 110 to 690 depending on the part number.

Procedures:
Instructions on how to use and remove the FLEX LOCATORS are provided. For removal, screws should be inserted into the tapped holes and screwed in. Installation and usage guidelines are referenced but not detailed in the document.

Materials and Treatment:
The tapered bushing is made of steel (SCM440) and is ISONITE treated (nitrocarburized), while the body is finished with black oxide.

Dimensions and Tolerances:
Specific dimensions for mounting holes and spacing tolerances are provided, with an allowable tolerance of ±0.02. The document includes detailed measurements for various parts, such as D, D1, H1, H2, and others.

Part Numbers:
Part numbers are listed for different configurations, including CP725-25050, CP725-16032, CP725-38070, and CP725-56095.

Additional Information:
References are made to additional resources on how to install and use FLEX LOCATORS, as well as the mechanism behind them.