Compression latches

K0518 Quarter turn lock, Material, surface finish: Housing and actuator die cast zinc, chromium-plated, powder-coated black for wing-knob version. Tongue steel, galvanized. small version Mounting cutout Sample order: Quarter turn lock K0518.16131 Tongue K0519.125X075 Note: Small quarter turn lock with spring-supported tongue. Usable on the right or the left.with a 90° closing path. The lock can be installed pre-assembled. The fastening nut is constructed as an earthing nut with claws on one side. Please order the desired version of the tongue separately. Every tongue can be combined with every...

K0520 Quarter turn lock with cylinder, small version Material, surface finish: Housing and actuator die cast zinc, chromium-plated. Tongue in steel, galvanized. Key nickel silver. Sample order: Quarter turn lock with cylinder K0520.131 Tongue K0521.128X105 A Mounting cutout Note: Small lockable quarter turn lock, usable on the right or the left, with a 90° closing path. The lock can be installed pre-assembled. The fastening nut is constructed as an earthing nut with claws on one side.These lockable quarter turn lock are each delivered with 2 keys. The key can be pulled out in both positions (open...

K0522 Quarter turn lock Material, surface finish: Housing, actuator and nut die cast zinc, chromiumplated, or PA6 plastic GFR 30, black. Rubber flat packing. Tongue steel, galvanized. Sample order: Quarter turn lock K0522.17181 Tongue K0523.145X045 (Please specify tongue spacing with „A“) Mounting cutout Note: Quarter turn lock with spring-supported tongue. Usable on the right or the left, with a 90° closing path. The lock can be installed pre-assembled. The fastening nut is constructed as an earthing nut with claws on one side. Vibratrion-proof (except plastic version); a catch prevents independent...

Secure quarter turn lock 42 Material, surface finish: Housing and actuator die cast zinc, chromium-plated or powder-coated. Nut in die cast zinc. Rubber flat packing. Tongue steel, galvanized. Key in die cast zinc, chromium-plated. Sample order: Secure quarter turn lock K0524.181 Tongue K0523.145X045 (Please specify tongue spacing with „A“) Key K0524.9 Note: Secure quarter turn lock with spring-loaded tongue. Usable on the right or the left, with a 90° closing path. The lock can be installed pre-assembled. The fastening nut is constructed as an earthing nut with claws on one side. Protected from...

with wing knob Material, surface finish: Housing and nut die cast zinc, chromium-plated. Spindle thermoplastic PA 6. GF 30, black. Rubber flat packing. Tongue steel, galvanized. Sample order: Quarter turn lock K0525.1183 Tongue K0523.145X045 (Please specify tongue spacing with „A“) Note: Quarter turn lock with wing knob. Usable on the right or the left.with a 90° closing path. The lock can be installed pre-assembled. The fastening nut is constructed as an earthing nut with claws on one side. Protected from water and dust in accordance with IP65. The lockable quarter turn locks are supplied with 2...

Quarter turn lock with T-grip Material, surface finish: Housing and nut die cast zinc, chromium-plated. T-grip thermoplastic PA 6 GF 30, black. Rubber flat packing. Tongue steel, galvanized. Sample order: Quarter turn lock K0526.1183 Tongue K0523.145X045 (Please specify tongue spacing with „A“) Note: Quarter turn lock with T-grip. Usable on the right or the left, with a 90° closing path. The lock can be installed pre-assembled. The fastening nut is constructed as an earthing nut with claws on one side. Protected from water and dust in accordance with IP65. Mounting cutout The lockable quarter...

with stepped tongue Material, surface finish: Housing, actuator, nut and tongue in die cast zinc, chromium-plated. Rubber flat packing. Sample order: Compression latch K0527.17301 Note: Compression latch with stepped tongue are primarily used for doors and housings that require a higher pressure force on the seal. Usable on the right or the left. The closing process always runs clockwise. By turning the actuator clockwise, the tightening path can be incrementally increased to 9.5 mm at a maximum rotation angle of 270°. The fastening nut is constructed as an earthing nut with claws on one side. Protected...

Compression latch with variable tightening length Mounting cutout Material, surface finish: Compression latch in steel galvanized and blue chromated. Star Grip DIN 6336 black duroplastic. Sample order: Compression latch K0528.1709161 Note: Compression latches are primarily used for doors and housings that require a higher pressure force on the seal. Usable on the right or the left. The closing process always runs clockwise. Assembly: A notch for the locking pin is made in a 025 mm hole. The closure is inserted through the borehole. In order to push and fasten the nut, the tongue must be in the end...

Material, surface finish: Housing, actuator, nut and tongue in die cast zinc, chromium-plated. Rubber flat packing. Tongue steel, galvanized. Mounting cutout Sample order: Compression latch K0529.18321 Tongue K0530.145X320 (Please specify tongue spacing with „A“) Note: Compression latches are primarily used for doors and housings that require a higher pressure force on the seal. Usable on the right or the left. The closing process always runs clockwise. Vibration-proof, protected from water and dust in accordance with IP65. Please order the desired version of the tongue separately. Every tongue...

Compression latch with adjustable tongue height KIPP Compression latch with adjustable tongue height Order No. Material, surface finish: Housing, actuator, nut and tongue in die cast zinc, chromium-plated. Powder-coated black for wing-knob version. Rubber flat packing. Tongue steel, galvanized. Sample order: Compression Latch K0531.18321 Tongue K0532.1000X590 Note: Compression latches are primarily used for doors and housings that require a higher pressure force on the seal. Usable on the right or the left. The closing process always runs clockwise. Vibration-proof, protected from water and dust...