Catalogs >
Steel Smith >
BALL-LOCK CLAMPING PINS

BALL-LOCK CLAMPING PINS
4Pages

Catalog excerpts

BALL-LOCK CLAMPING RECEPTACLES 180°C (Standard) (Safety Lock) Related Product Page Part Number Nut (Stainless Steel) (Separately Sold) Part Number BALL-LOCK CLAMPING PINS imno Body Steel (S45C) Quenched and tempered Electroless nickel plated

Open the catalog to page 1

Technical Information ・ Heat resistance : up to 180℃ ・ Mechanical Strength Tensile Strength 1,800N (at active safety lock) Clamping Force 7N,15N Balls The 3 balls pull in the clamping pin. How To Operate Safety Lock Safety Locking Mode Turn in the arrowhead direction pushing the locking knob. To release the safety lock, follow the steps back. Inactive Mode Active Mode When the mark lines on the end of the locking knob are aligned, the safety lock is active. Application Examples Changes of chuck of handling machines BALL-LOCK CLAMPING RECEPTACLES QCBA0816 BALL-LOCK CLAMPING RECEPTACLES...

Open the catalog to page 2

Installation Instructions for "Standard" Ball-Lock Clamping Receptacles For installation in a subplate of thickness ranging from 6mm to 10mm, use a nut for fastening. For installation in a subplate of thickness over 10mm, use a screw-in method. M16×1.5 （Fine Threads） Installation in a subplate Installation Instructions for "Safety-Lock" Ball-Lock Clamping Receptacles For installation in a subplate of thickness ranging from 6mm to 10mm, use a nut for fastening. For installation in a subplate of thickness ranging from 10mm to 32mm, use a screw-in method.

Open the catalog to page 3

Installation Instructions for Ball-Lock Clamping Pins Installation in 6mm-thick plates ■Machining Accuracy Spacing Tolerance ±0.1 Fixture Plate Repeatability of ±0.25 can be maintained Locating Pin (Round) Spacing tolerance on both the fixture plate and the subplate should be ±0.1. For highly accurate locationg, use locatin

Open the catalog to page 4