JTH www.stavoklima.eu Cell silencers ATL

08/09 Technical modifications reserved page 2 The Cell Silencer is suitable to be used within air conditioning ductwork, into structural openings or air handling equipment, wherever noise reduction is required. The cores are manufactured using galvanised sheet steel as a standard, have slide on fl anges & achieves a low pressure loss with a low self-noise Lw. „o Standard cores are suitable for non-abrasive air mass up to maximum of 200 deg °C . „o Where required, cores can be suitable for hygienic processes with use of alternative materials (stainless steel). „o The wide range of dimensions available...

JTH /08/09-AN STAVOKLIMA V.O.S. HORNÍ 22 • CZ-370 04 • ÈESKÉ BUDÌJOVICE tel.: +420 387 001 946, +420 387 001 931 fax: +420 387 001 950 e-mail: [email protected] http://www.stavoklima.eu Representative: To make easy proposal and selection of the right combination of silencers in accordance with noise source and complete noise situation in ductwork, we have developed a special programm for this purpose - horizontal - single placement POSITION OF SILENCERS IN DUCTWORKS OR IN STRUCTURAL OPENINGS SELECTION PROGRAM vertical - single placement vertical or horizontal - combined placement, even geometry...