Shaft Alignment Accessories

© Final check Notes: The pictures above are screenshots directly from the NXA measurement software. Nearly all measurement equipment manufacturers use this procedure. It makes sense to measure again after "shimming" for the height, as during this correction the horizontal position is usually disturbed. Thermal growth and "Soft Foot" are purposely not mentioned above, enabling more emphasis on the use of shims for the height and MoveAssist Pro for the horizontal correction.

Aluminium-framed Shimcases Solid shims in stainless steel are available packaged in convenient aluminium framed cases, each with a compartmentalised high density foam insert. The refillable cases are available with four different assortments: SHIMCASE 1 Size: 350x160x280 mm Weight: 13 kg Contents: 360 Shims in varying thicknesses for bolt sizes: M12, M18 and M27. SHIMCASE 2 Size: 350x160x280 mm Weight: 17 kg Contents: 510 Shims in varying thicknesses for bolt sizes: M12, M18 and M27. SHIMCASE 3 Size: 350x160x280 mm Weight: 15 kg Contents: 340 Shims in varying thicknesses for bolt sizes: M12,...

Packaging sizes for shims Precut Shims have many advantages over hand cutting • Exact thinkness and size • The thinkness is printen on every shim • Reuseability • Massive time saving SPM Shims are available in 5 sizes, fitting to clamping bolts M12, M18, M27, M36 and M52. You can choose between solid stainless steel shims and laminated shims in either brass or stainless steel. 10 stainless steel shims, single thickness

Horizontal machine correction using MoveAssistPro® is a precisely machined tool enabling alignment of industrial machines. Spanner sizes of 17mm AF to 30mm AF (MoveAssistPro® Basic) or 17mm AF up to 46mm AF (MoveAssistPro® Professional) enable controlled horizontal movement on practically all kinds on machines. MoveAssist® utilizes the foot / tie-down bolts as an "anchor point" to apply pressure efficiently! SP MOV-AST-10 MoveAssistPro® Basic Set for Spanner sizes from 17mm AF up to 30mm AF SP MOV-AST-30 MoveAssistPro® Professional Set for Spanner sizes from 17mm AF up to 46mm AF

SP MOV-AST-10 MoveAssist Pro Basic Set. Case contents SP MOV-AST-30 MoveAssist Pro Professional Set. Case contents

Attachments and brackets FIX 1-0870 Magnetic fixture Alternative attachment of the FL XA, FL GO & FL NXA sensors FIX 2-0873 Magnetic fixture For use on Siemens Windmills (Generator side) FIX 2-0874 Magnetic fixture For use on Vestas Windmills (Coupling) FIX 2-0965 Magnetic fixture For use on GE Windmills (Coupling) FIX 1-0776 Bridge For fixed shafts FIX 1-0775 Ultra-thin chain bracket Width:10mm. Comprising of a tensioning chain and a mounting bridge for the sensor FIX 2-0811 Extension chain Extension chain for the Ultra thin bracket. Length: 920mm FIX 1-0784 OL2R Attachment Set For use when...

A precision Spirit-level can be useful when assembling machines. We recommend: juLevel - Cost-effective measurement - Measurement of straightness and flatness - Measurement resolution = 1^/m - Easy to use - Compact, yet rugged design - Minimal training required Status Pro Maschinenmesstechnik GmbH Mausegatt 19 ■ 44866 Bochum ■ Germany S' + 49 (0) 2327 - 9881 - 0 S + 49 (0) 2327 - 9881 - 81 IndustriestraGe 11 ■ 85609 Aschheim ■ Germany B* + 49 (0) 89 - 904864 - 0 a + 49 (0) 89 - 904864 - 19 www.statuspro.com ■ @ [email protected] BR 1087 E 03/14 • Design / DTP: Seichter & Steffens Grafikdesign,...