microscopes ? specialty
5Pages

microscopes – specialty DRILL INSPECTION MICROSCOPE A must for every printed circuit drilling department. No matter how good your circuit drilling machine or how carefully calculated your feeds and speeds are, if the drill bit has bad point geometry or a chipped cutting edge, you are sure to end up with problems. From poor drill centering, which causes bad registration, to rough holes, which can cause plating voids. Add these to some nice multilayer boards and you have EXPENSIVE problems. A simple, but quick inspection of incoming drills, or inspection just prior to use, can save you thousands of dollars in rejected boards. Features • Smooth rotational focusing ring • Outstanding clarity from the 25X quality optics • Comfortable rubber eye guard • Reticle with measuring scale • Heavy duty black anodized aluminum body • Holds .125" (3.18mm) shank drills Horizontal mount is for checking flute, margin and relief. Vertical mount is for checking drill point geometry and surface finish. Switch from horizontal to vertical mount easily. No need to remove depth-setting rings to inspect drills. Reticle Included CATALOG # SMDRILLCHEK3* POWER 25X** MIN. SCALE DIVISION .002" (.05mm) OVERALL DIMENSIONS 2 x 2 x 7" (50.8 x 50.8 x 178mm) WEIGHT 7.3 oz. (207g) PRICE $239.00 *for metric scale, add “M” to end of catalog # **50X available GRATICULES DEPTH MEASURING MICROSCOPE, PORTABLE The OPGCP879 is a portable microscope for measuring the size and depth of objects. It is a versatile tool for use in the workshop, the laboratory or in the field to measure the thickness of photographic film, depth of coatings on opaque materials, pits and scratches, depth of blind cavities, cracks in opaque and translucent materials, solder thickness, silk screen ink coating, machined surfaces, surface corrosion, indentations, etc. Built entirely out of metal with high quality glass optics, this heavy duty microscope is precision engineered to meet the rigors of continuous use in a variety of environments. Through-the-lens illumination is provided by an external power supply and the light is above the objective lens. Operation The microscope is focused on one surface and the zero datum mark is adjusted to coincide with the zero of the depth scale. The focus is then adjusted to the second surface and the separation of the two surfaces or depth is read directly from the scale. This instrument (which has a fixed calibration) is focused by means of the rotating central body section. CATALOG # POWER DIRECT READING REPEATABILITY OPGCP879* 200X to 10 micron - .000393" (.01mm) to 2 micron - .000078" (.002mm) (estimations to 5 microns or better without the use of verniers) PRICE $1,499.00 *results obtained will depend upon the ability and experience of the operator Through-the-Lens Illumination and Wooden Case Included 30 $50 minimum order. All prices and specifications are subject to change without notice. 1300 N I-35 E Suite 120 • Carrollton, Texas 75006 USA 800-259-1986 • 972-245-1999 • fax: 972-323-0914 www.startinternational.com • email: sales@startworld.net

microscopes - specialty THROUGH HOLE MICROSCOPE PCB Through Hole Microscope is designed for critical inspection of plated-through holes in printed circuit boards. When viewing the complete hole, the inspector will perceive the image being distorted to a bucket (truncated cone) shape. Magnification of the scope varies with the position of the zoom, but is approximately 60X at mid-position. When used over a light table, voids, drill damage, burrs, obstructions and plating faults can be identified quickly and with certainty. The instrument is supplied ready for use. A wooden carrying case is...

microscopes – specialty DEPTH MEASURING TABLE TOP MICROSCOPE START International’s Depth Measuring Microscope was designed to measure minute variations in the Z axis on parts that do not lend themselves to mechanical measuring (contact), such as soldering paste, conformal coatings, or paint. Applications • Solder and solder paste thickness • Height of lead frames • Wire bond height on lead wires • Measuring minute crack depths • Engraving or etch depth on printing plates • Depth of grooves on computer disks • Depth of score or V cuts on printed circuit boards • Measuring pits on molded or...

microscopes - specialty LONG WORKING DISTANCE MICROSCOPES Observe Anything at a Glance • Drill bits or end mills in contrast to work • Functions of a machine in operation • Inside an aircraft engine without using a borescope Inspecting virtually any surface at a distance Can be used as an alignment telescope Confirm accuracy in machine processing Conveyorized inline inspection PEAK LONG WORKING DISTANCE MICROSCOPE Variable powers from 27X at 7.9" (200mm) to 8X at 19.7" (500mm) Optical glass lens surfaces have a color corrected coating to insure a bright full contrast of images Eyepiece...

microscopes - specialty START'S SMD Inspection system is ideal for inspecting and verifying the quality of printed circuit boards. Quick change-over can be made between vertical and oblique observation by one-touch slide movement of the SMD attachment. This special feature enables objects to be viewed from 20° to 80° angles. Check alignment and solder quality with ease and accuracy; especially when aided by one of the video systems designed for this unit. Video options make this system very easy on the eyes and body, thus improving the work quality, attitude and productivity of every person...