Easy Data Transfer Starrett SmartCable™ makes it fast and easy to connect a measuring tool to a PC. The interface provides the ability to connect through USB and USB keyboard outputs. With the SmartCable keyboard output, no software wedge or other intermediary software is required. The PC "sees" the connection from the SmartCable™ as a keyboard. Simply, open any document on your computer that accepts input, position your cursor, then send the data from the tool. That data will be input at the cursor location. Also available are the 795SCU and 733SCU which provide USB output for Starrett 795 and 733 micrometers respectively, and 2600 indicators. They do not have the keyboard function and require Starrett the 719 Software Wedge or a similar product to input the data to the PC. From manufacturing methods and materials to a built-in power-saving mode, SmartCable was designed to be an environmentally friendly product. • Simple set-up - your PC automatically installs the USB driver when the SmartCable is plugged into PC's USB port. The PC "sees" the Smartcable as a keyboard • Supports USB 2.0, RS232 and optional keyboard output • Operating modes: Static (Normal) mode operation or Dynamic Starrett 719 Software Wedge™ (for SCU cables) This configurable serial I/O software allows real-time data input from Starrett gages through 795SCU and 733SCU cables directly into Bulletin No. 396 5M/T 08/11 Specifications subject to change. starrett.com 978-249-3551