Cutting Rate in Square Inches Per Minute
This section provides a detailed table showing the cutting rate in square inches per minute for various bar diameters and areas. The table lists the minutes per cut for different bar diameters ranging from 1.00 to 10.00 inches, with corresponding area values and cutting times for each diameter.

Recommended Tension for Starrett Band Saw Blades
This section outlines the recommended tension for different types of Starrett band saw blades. The tension is specified in both English (PSI) and Metric (Kg/cm²) units for Bi-Metal blades (1-1/2" & wider, and thru 1-1/4" wide), Duratec™ PH, and Duratec™ FB. It emphasizes that insufficient blade tension can affect cutting efficiency, while excessive tension may cause blade breakage. The guide suggests using higher tension when guide arms are further apart and lower tension when they are closer together.

Reading the Chips
This section provides guidance on interpreting chip formation, condition, and color to assess blade speed and feed. It suggests adjustments to cutting parameters based on chip characteristics to optimize cutting performance.

General Recommendations
The document includes general recommendations for machining, such as checking cutting fluid and referring to machining recommendations for correct tooth pitch. It also provides a brief note on the precision, quality, and innovation of Starrett Band Saw Blades.