*mydirectindustry

Catalogs
STARRETT
ADVANZ FS

ADVANZ FS

Product catalog summary

Introduction
Advanz FS is a new line of carbide-tipped band saw blades designed for high-speed sawing of tough materials, including composites and metals. These blades are particularly effective where bi-metal blades fall short.

Specifications and Features

Material Composition: The blades feature teeth made from high-quality, micro-grained carbide cylinders, which are welded to a tough, ductile backing material.
Performance: They offer exceptional fatigue, shock, and wear resistance, making them suitable for cutting aluminum castings, fiberglass, masonite, plastics, composite materials, and abrasive woods.
Design Improvements: The blades incorporate new micro-grained carbide for enhanced toughness, wear, and shock resistance. They also feature improved carbide-to-back bonding and triple chip tooth geometry.
Additional Benefits: The blades provide a smooth surface finish, faster cutting speeds, and improved strip resistance.

Available Sizes

3/4 x .035 inch (19 x 0.90 mm) - Material Number: 92550
1 x .035 inch (25 x 0.90 mm) - Material Numbers: 92507, 99552
1 x .050 inch (25 x 1.30 mm) - Material Number: 92553
1-1/4 x .042 inch (32 x 1.10 mm) - Material Number: 92513
1-1/4 x .050 inch (54 x 1.30 mm) - Material Number: 92555

All sizes are available in 150-foot (45m) coils.

Additional Information
For more details, visit the Starrett website or contact a local distributor. Specifications are subject to change as per Bulletin No. 1020, dated 02/09.

Catalog excerpts

High-speed sawing of tough materials from composites to metals. Advanz FS is one of our new carbide-tipped band saw blades. These blades can saw tough materials that bi-metal blades cannot cut. Advanz FS features teeth ground from high-quality, micro-grained carbide cylinders welded to a tough, ductile backing material. These carbide-tipped blades offers exceptional fatigue, shock and wear resistance when cutting aluminum castings, fiberglass, masonite, plastics, composite materials and abrasive woods. • New micro-grained carbide selected for toughness, wear and shock resistance. • Improved carbide-to-back bonding. • Triple chip tooth geometry. • Tough ductile back. Smooth surface finish. Faster cutting speeds. Improved strip resistance. Advanz™ FS (replaces Carbide Tipped Type I) All sizes available in 150 (45m) coils. SOLID TUBULAR STRUCTURAL For more information, visit our website or contact your local distributor today. Specifications subject to change. Bulletin No. 1020 10M/M 02/09

Open the catalog to page 1

ADVANZ FS

ADVANZ FS

Catalog excerpts

All STARRETT catalogs and technical brochures

Archived catalogs