The Starrett 3814 provides reliable Rockwell Hardness values on all types of metal and alloys, hard or soft, and in many shapes. This reliable bench hardness tester has a high quality casting, is ergonomically designed for easy operation, and is engineered to ensure accurate results. It is an ideal basic hardness solution, economically priced to suit a variety of lab, workshop, toolroom and inspection department applications. The 3814 conforms to ASTM E-18 standard. The tester is furnished with a diamond indentor, a 1/16" ball indentor, three certified test blocks, four test tables – 5.87" and 2.5" flat anvils, 5/8" spot anvil, and a standard vee anvil – and an accessory case. Features Ability to handle Rockwell Scales A through H and K Stable cast iron construction Ideal basic hardness testing for many typical applications Economically priced Technical Specifications Minor load Major load Test force application Test force control Results display Throat depth Maximum test height Unit height/width/depth Unit Weight Bulletin No. 559 10Kgf A: 60Kgf, B: 100Kgf, C: 150Kgf (Dead weight applies test force) Hydraulic dashpot system Analog - dial gage 6.6" (168mm) 6.69" (169.9mm) 30 x 8.5 x 20" (762 x 216 x 508mm) 187 lbs. (85 kg) 10M/S 02/03 Printed in USA Accessories* Description Cat. No. Analog Hardness Tester 3814 Diamond Indentor PT05245 1/16" (14mm) ball indentor PT05249 RA test block (Rockwell A scale 80) PT05069 RB test block (Rockwell B scale 90) PT05059 RC test block (Rockwell C scale 63) PT05050 Master Block set Rockwell C scale PT05272 EDP 67754 67944 67948 67897 67888 67879 67969 * Contact The L.S.Starrett Company for other accessories. 978-249-3551 • www.starrett.com