1202F Fractional Dial Caliper Direct Reading in Fractions For many applications, the dimension being checked is specified as a fraction. Since dial and electronic calipers display measurements as decimals, the person doing the measurement must convert the decimal readout from the dial into a fraction - inconvenient at best, and sometimes leading to errors. The Starrett 1202F solves this The 1202F shows measurements as fractions on the yellow outer scale with 1 /64th inch graduations, and decimal measurements on the white inner scale with 1/100th inch graduations. • Sharp, clear dial graduations of 1/64" on the yellow outer scale, and .01" on the white inner scale • Thumb-operated fine adjustment roll • Sharp, black graduations on the satin finished bar, every .1" • Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod • Positive, spring-loaded double pinion anti-backlash control • Lock screws for sliding jaw and dial bezel • Knife-edge contacts • Adjustable bezel 1202F Fractional Dial Caliper 0-6" Fractional Dial Caliper in Case 0-8" Fractional Dial Caliper in Case 0-12" Fractional Dial Caliper in Case Bulletin No. 373 PDF 12/11 Specifications subject to change.