TECHNICAL DATA SHEET SOLDER Bi58Sn42, Bi57Sn42Ag1 Lead-free aUoys with Low melting pointDESCRIPTION Stannol Ecoloy Bi58Sn42 and Bi57Sn42Ag1 are produced according to or in analogy to DIN EN ISO 9453 (Alloy No. 301). The products offers the following advantages: • Low Melting Point 139°C • Excellent Wetting • Fast flowing Solder • For Temperature Sensitive Components • Lead-free - RoHS Compliant Stannol Ecoloy Bi58Sn42 and Bi57Sn42Ag1 are for use in wave-, selective- or dip solder machines. This solid solder is compatible with a large variety of fluxes which are commonly used in electric and electronics industry. Stannol Ecoloy Bi58Sn42 and Bi57Sn42Ag1 may not be used together with lead containing solders. * complying with DIN EN ISO 9453 ** analogous to DIN EN ISO 9453 Triangular bars, Solid Solder Wire Before use please read the material safety data sheet carefully and observe the safety precautions described. STANNOL GmbH & Co. KG • Issue: 15.02.18 Haberstr. 24 • 42551 Velbert • Tel: +49 (0)2051-3120-0 • Fax: +49 (0)2051-3120-111 • E-Mail: [email protected] • www.stannol.de

NOTICE The above values are typical and represent no form of specification. The Data Sheet serves for information purposes. Any verbal or written advise is not binding for the company, whether such information originates from the company offices or from a sales representative. This is also in respect of any protection rights of third parties, and does not release the customer from the responsibility of verifying the products of the company for suitability of use for the intended process or purpose. Should any liability on the part of the company arise, the company will only indemnify for loss...