video corpo

Rail Drill - RD12
2Pages

{{requestButtons}}

Catalog excerpts

Rail Drill - RD12 - 1

Rail Drill RD12 SPECIFICATIONS Features and Benefits The power of the RD12 when used in conjunction with our exclusive indexable carbide tipped bits easily drills both hardened and standard rail with the same tool, providing the lowest cost per hole available on the market. Lightweight Aluminum Construction provides ease of handling, loading and unloading. Preset Integrated Water Ports for accurate and continuous drill lubrication. Water coolant eliminates need to maintain and store costly oils or chemicals. Automatic Water Shut-Off when the spindle is retracted. This feature conserves water thereby reducing downtime required to refill the water tank. Over-Center Clamp Design provides quick and easy setup of tool on rail. Automatic Drill Feed and Spindle Speed provide greater precision in drilling. Tool Rack for holding extra bits and TorxTM driver provides greater operator convenience and speed in setting up the RD12 Rail Drill. Fast Drilling Speed at 40 seconds or less per hole increases daily production while reducing labor costs. Keyless Chuck requires no tools to install or remove bits. Accessory Features and Benefits Carbide Drill Inserts are four-way indexable and require no sharpening. These field-replaceable, disposable inserts provide up to 300 holes per bit in standard rail, excellent drill hole finish, and a reduction in cost per hole. Rail Templates can be changed easily without the use of additional hand tools. ITEM U.S.A. METRIC INPUT FLOW RANGE 8 - 10 gpm 30 - 38 lpm INPUT PRESSURE 2000 psi 140 bar MAX. BACK PRESSURE 250 psi 17 bar WEIGHT 58.5 lbs 26.5 kg LENGTH 28 in. 71.1 cm WIDTH 8 in. 20.3 cm HEIGHT 12 in. 30.5 cm WATER CAPACITY 2 gallons 7.6 liters RPM (at 10 gpm / 38 lpm) 900 FEED RATE .0013 in. per revolution .03 mm per revolution OUTPUT 1.5 in. hole in 40 sec 38 mm hole in 40 sec CONNECTOR HTMA Flush Faced Coupler P/N 30993 03/98 1.5M

Open the catalog to page 1
Rail Drill - RD12 - 2

Stanley Hydraulic Tools 3810 SE Naef Road Milwaukie, OR 97267·5698 Tel 503·659·5660 Fax 503·652·1780 All Stanley Hydraulic Tools, Parts, Accessories and allied equipment are subject to design improvements, specification and price changes at any time without notice and with no obligation to units already sold. Weights, dimensions and operating specifications listed herein are subject to change without notice. Where specifications are critical to your application, please consult Stanley Hydraulic Tools. WARRANTY Stanley Hydraulic Tools and their associated parts are warranted against defects...

Open the catalog to page 2

All Stanley Infrastructure catalogs and technical brochures

  1. RAILWAY TOOLS

    19 Pages

  2. HANDHELD TOOLS

    23 Pages

  3. CE Products

    13 Pages

  4. DS06

    4 Pages

  5. CO25

    2 Pages

  6. GR60

    2 Pages

  7. CT Tools

    4 Pages

  8. HGE

    2 Pages

  9. CH15

    2 Pages

  10. CH18

    2 Pages

  11. CS05-06

    2 Pages

  12. BLS

    2 Pages

  13. Grinders

    2 Pages

  14. Frog Grinder

    2 Pages

  15. Cut-Off Saw

    2 Pages

  16. Chain Saw

    2 Pages

  17. DL07 Drill

    2 Pages

  18. TA57 Tamper

    2 Pages

  19. DROP HAMMERS

    2 Pages

  20. IW12

    3 Pages

  21. IW16

    2 Pages

  22. Safe Bond

    2 Pages

  23. Drill

    2 Pages

  24. Tie Tampers

    2 Pages

  25. Tamper

    2 Pages

  26. Trash Pump

    2 Pages

  27. Earth Auger

    2 Pages

Archived catalogs

  1. Gas Rail Saw

    2 Pages