video corpo

Mounted Compactors - HS Series
2Pages

{{requestButtons}}

Catalog excerpts

Mounted Compactors - HS Series - 1

Mounted Compactors SPECIFICATIONS 40589 02/2004 Stanley Hydraulic Tools 3810 S.E. Naef Road Milwaukie, Oregon 97267 Tel 503•659•5660 Fax 503•652•1780 HS Series MODEL 2500 3000 6000 8000 11000 22000 Performance USA/Metric USA/Metric USA/Metric USA/Metric USA/Metric USA/Metric Centrifugal Force 2500 lb/1150 kg 3400 lb/1542 kg 6400 lb/2902 kg 8000 lbs/3630 kg 11,350 lb/5147 kg 22,000 lb/10,000 kg Frequency 2l00 vpm 2l00 vpm 2000 vpm 2000 vpm 2000 vpm 2100 vpm Dimensions and Weight Spread between pins 9 in/23 cm 9 - 14 in/23 - 36 cm 14 in/35.6 cm 14 in/35.6 cm Flat Top Flat Top Baseplate size 11 x 23 in/ 17.4 x 20 in/ 23 x 26 in/ 24 x 30 in/ 27 x 30 in/ 32 x 42 in/ 28 x 58 cm 44.5 x 51 cm 58 x 66 cm 61 x 76 cm 69 x 76 cm 81 x 107 cm Length 29.5 in/75 cm 25.5 in/65 cm 31 in/79 cm 37.6 in/95.5 cm 35 in/89 cm 45 in/ 114 cm Width inside Bracket 8.25 in/21 cm 10.25 in/26 cm 10.6 in/26.9 cm 10.7 in/27.2 cm N/A N/A Height 18.5 in/47 cm 18 1/2 in/47 cm 24 in/61 cm 28.7 in/73 cm 29 in/73.66 cm 41.25 in/104.78 cm Width 11.5 in/29 cm 17.5 in/44.5 cm 23 in/58 cm 24 in/61 cm 27 in/69 cm 32 in/81 cm Weight 260 lb/118 kg 370 lb/168 kg 825 lb/374 kg 975 lbs/442 kgs 1425 lb/646 kg 2200 lb/998 kg Mounting Pin Diameter 1.5 in/38 mm Universal* Universal* Universal* Universal* Universal* Hydraulic Requirements Rated Hydraulic Flow 7 - 9 gpm/ 9 or 13 gpm/ 13 gpm/ 24 gpm/ 30 gpm/ 42 gpm/ 26 - 34 lpm 34 or 49 lpm 49 lpm 91 lpm 113 lpm 159 lpm Min. Carrier System Flow 12 gpm/45 lpm 12 gpm/45 lpm 22 gpm/83 lpm 28 gpm/106 lpm 40 gpm/151 lpm Max. Carrier System Flow 25 gpm/95 lpm 25 gpm/95 lpm 40 gpm/151 lpm 50 gpm/189 lpm 60 gpm/227 lpm Operating Press. (up to) 1500 psi/ 1600 - 2000 psi/ 1800-2000 psi/ 2000 psi/ 1800-2150 psi/ 1800-2250 psi/ 105 bar 110 - 140 bar 127-140 bar 138 bar 124-148 bar 124-155 bar *Contact factory for appropriate mounting hardware for your application Stanley’s HS series of mounted compactors are designed for extreme-duty applications and built to deliver maximum vibratory force. Stanley compactors can take the worst kind of punishment because of their patented baseplate design with rubber outboard shock mounts. This design results in a more rigid plate which evenly distributes the vibration and extends the life of both compactor and carrier. For soil compaction, the HS series compacts backfill lifts of up to four feet - more than five times the efficiency of hand held compactors without the associated safety and maintenance problems. For slope compaction, the HS series is the only way to efficiently compact materials on an incline. The HS series can also drive and extract piles, fence posts, sheeting, I-beams, soldier piling, guardrails or pipe. All models (except model HS2500) come standard with flow control to prevent overspeeding. Overspeeding can reduce bearing life and produce low-quality compaction. The HS Series compactors can be easily switched from one carrier to another by means of a universal mounting bracket which can accept various sizes of pins and bushings. The HS series keeps your crew out of the trench during compaction and is far more productive than handheld equipment. Model HS8000 Shown

Open the catalog to page 1
Mounted Compactors - HS Series - 2

WARRANTY Stanley Hydraulic Tools and their associated parts are warranted against defects in materials and workmanship for a period of twelve months from the date of purchase. Stanley Hydraulic Tools reserves the right to repair or replace only those parts which prove to have been defective at the time of purchase. This warranty becomes void if maximum flow and pressure ratings are exceeded. Stanley Hydraulic Tools 3810 S.E. Naef Road Milwaukie, Oregon 97267 Tel 503•659•5660 Fax 503•652•1780 All Stanley Hydraulic Tools, parts, accessories and allied equipment are subject to design...

Open the catalog to page 2

All Stanley Infrastructure catalogs and technical brochures

  1. RAILWAY TOOLS

    19 Pages

  2. HANDHELD TOOLS

    23 Pages

  3. CE Products

    13 Pages

  4. DS06

    4 Pages

  5. CO25

    2 Pages

  6. GR60

    2 Pages

  7. CT Tools

    4 Pages

  8. HGE

    2 Pages

  9. CH15

    2 Pages

  10. CH18

    2 Pages

  11. CS05-06

    2 Pages

  12. BLS

    2 Pages

  13. Grinders

    2 Pages

  14. Frog Grinder

    2 Pages

  15. Cut-Off Saw

    2 Pages

  16. Chain Saw

    2 Pages

  17. DL07 Drill

    2 Pages

  18. TA57 Tamper

    2 Pages

  19. DROP HAMMERS

    2 Pages

  20. IW12

    3 Pages

  21. IW16

    2 Pages

  22. Safe Bond

    2 Pages

  23. Drill

    2 Pages

  24. Tie Tampers

    2 Pages

  25. Tamper

    2 Pages

  26. Trash Pump

    2 Pages

  27. Earth Auger

    2 Pages

Archived catalogs

  1. Gas Rail Saw

    2 Pages