Group: Stanley
Catalog excerpts
P/N 49122 10-01 NOTE: Weights, dimensions and operating specifications listed on this sheet are subject to change without notice. Where specifications are critical to your application, consult your dealer or Stanley Hydraulic Tools. STEALTH BREAKER SPECIFICATIONS ITEM UNITS MB20EXS MB30EXS MB40EXS MB50EXS MB60EXS MB70EXS MB80EXS MB100EXS Impact Energy Class ft-lb 1500 2000 3000 5000 6000 7500 8500 12000 J 2034 2712 4068 6780 8136 10170 11526 16272 Oil Flow Range gpm 15 - 25 20 - 30 24 - 35 32 - 45 37 - 50 45 - 63 51 - 67 55 - 80 lpm 56 - 95 76 - 114 90 - 130 120 - 170 140 - 190 170 - 240 190 - 250 208 - 302 Maximum psi 2500 2500 2500 2700 2700 2700 2700 2700 Hydraulic Pressure bar 172 172 172 186 186 186 186 186 Blows Per Minute blows per 360 - 800 500 - 700 400 - 600 400 - 500 300 - 450 300 - 400 280 - 370 230 - 320 Range minute Weight (with tool bit) lb 1259 1898 2859 3964 4566 5803 6246 8799 kg 571 861 1297 1798 2071 2632 2833 3991 Length (with tool bit) in 71 77 89 96 105 110 117 128 mm 1802 1962 2264 2451 2656 2783 2962 3241 Tool Working Length in 18.3 19 25 29 31.5 33.6 35.2 35 mm 466 486 646 727 800 853 895 890 Tool Diameter in 3.3 3.9 5 5.5 5.9 6.1 6.5 6.9 mm 84 100 127 140 150 155 165 175 System Relief psi 3000 3000 3000 3100 3100 3100 3100 3100 bar 207 207 207 214 214 214 214 214 Noise Level ft 20 - 40 23 - 46 33 - 59 52 - 72 69 - 98 85 - 115 115 - 130 125 - 148 85 dBA @ distance m 6 - 12 7 - 14 10 - 18 16 - 22 21 - 30 26 - 35 35 - 40 38 - 45 MB60EXS Breaker Mounting bracket not included, must be ordered separately. Mounted Breakers MB EXS Stealth Series S Silenced. Noise suppression features make the new Stanley breakers some of the quietest on the market today. T Trimmed. Narrower profile allows the breaker to work closer to the walls of a trench and give better visibility for the operator. E Enclosed Housing. The powercell is suspended between bumpers eliminating damaging shocks transmitted to the carrier. A Armored Lower End. The housing is double strength at the lower end of the breaker to fully protect the powercell. L Lighter Weight. New generation stealth breakers are lighter in weight, allowing use of a lighter, less expensive carrier. T Two Moving Parts. Translates into less maintenance, better performance, and significantly less service. H Hard Hitting. Stanley breakers, pound for pound, are the hardest hitting breakers in their class. STEALTH BREAKER FEATURES
Open the catalog to page 13810 SE Naef Road Tel 503-659-5660 www.stanleyworks.com Stanley Hydraulic Tools Milwaukie, OR 97267 USA Fax 503-652-1780 1-800-549-0517 WARRANTY Stanley Hydraulic Tools and their associated parts are warranted against defects in materials and workmanship for a period of twelve months from the date of purchase. Stanley Hydraulic Tools reserves the right to repair or replace only those parts which prove to have been defective at the time of purchase. This warranty becomes void if maximum flow and pressure ratings are exceeded. ORDERING INFORMATION Model Description MB20EXS STEALTH Mounted...
Open the catalog to page 2All Stanley Infrastructure catalogs and technical brochures
-
UNDERWATER TOOLS
7 Pages
-
MOUNTED ATTACHMENTS
7 Pages
-
HANDHELD CORDLESS TOOLS
7 Pages
-
ELECTRIC UTILITY TOOLS
15 Pages
-
RAILWAY TOOLS
19 Pages
-
HANDHELD TOOLS
23 Pages
-
CE Products
13 Pages
-
Heavy Attachments
29 Pages
-
BR50 HYDRAULIC BREAKER
2 Pages
-
DS06
4 Pages
-
CO25
2 Pages
-
GR60
2 Pages
-
CT Tools
4 Pages
-
HGE
2 Pages
-
CH15
2 Pages
-
CH18
2 Pages
-
CS05-06
2 Pages
-
BLS
2 Pages
-
Underwater Catalog
47 Pages
-
LaBounty Catalog
24 Pages
-
Stanley Infrastructure
36 Pages
-
Electric Utility
32 Pages
-
Mounted Catalog
20 Pages
-
Railroad Catalog
36 Pages
-
Hand Held Catalog
48 Pages
-
Pin Brazing / Safebonding
1 Pages
-
Large Mounted Breakers
2 Pages
-
Impact Wrenches IW16
2 Pages
-
Impact Drill ID07
2 Pages
-
Hydraulic Rail Saws
2 Pages
-
Horizontal Grinder HG80
2 Pages
-
Handheld Breakers BR67
2 Pages
-
Hydraulic Ground Rod Driver
2 Pages
-
Grinders
2 Pages
-
Frog Grinder
2 Pages
-
Environmental Padlocks
2 Pages
-
Diamond Chain Saws DS11
4 Pages
-
Cut-Off Saw
2 Pages
-
Cupstone Grinder
2 Pages
-
Catenary Maintenance
8 Pages
-
Crimping Tools
4 Pages
-
Concrete Pulverizers
2 Pages
-
Chain Saw
2 Pages
-
Bull Nose Grinder
2 Pages
-
Bucket Link Shears
2 Pages
-
HD45 underwater hammer drill
2 Pages
-
DL07652 underwater drill
2 Pages
-
90 CLASS BR87
2 Pages
-
70 CLASS BR67
2 Pages
-
40 CLASS BR45
2 Pages
-
DL07 Drill
2 Pages
-
Spike Pullers
1 Pages
-
TA57 Tamper
2 Pages
-
Mounted Breaker - MB15EXS
2 Pages
-
DROP HAMMERS
2 Pages
-
Rail Saw - RS25
2 Pages
-
Weld Shear - WS10
2 Pages
-
Robotic Welder - RW20
2 Pages
-
TracHorse - MHP1
2 Pages
-
HP08 Hydraulic Power Unit
2 Pages
-
GTR Hydraulic Power Units
2 Pages
-
Sinker Drill - SK58
2 Pages
-
Hammer Drill - HD45
2 Pages
-
Hydraverter - HV18
2 Pages
-
Core Drill - CD10
2 Pages
-
Power Units - GT18
2 Pages
-
Sinker Drill - SK47
2 Pages
-
IW12
3 Pages
-
IW16
2 Pages
-
Hammer Drill - HD08
2 Pages
-
Core Drill - CD12
2 Pages
-
Rail Drill - RD12
2 Pages
-
Rail Drill - RD11
2 Pages
-
Safe Bond
2 Pages
-
Cup Stone Grinder
2 Pages
-
Drill
2 Pages
-
Profile Grinder
2 Pages
-
Underwater Grinder
2 Pages
-
Vertical Grinder
2 Pages
-
Tie Tampers
2 Pages
-
Tamper
2 Pages
-
Dewatering Pump
2 Pages
-
Trash Pump
2 Pages
-
Diaphragm Water Pump
2 Pages
-
hydraulic post driver
2 Pages
-
Hydraulic Post Puller
2 Pages
-
Earth Auger
2 Pages
-
hydraulic pruner
2 Pages
-
chipping hammer
2 Pages
Archived catalogs
-
Gas Rail Saw
2 Pages
-
Small Hydraulic Power Unit
2 Pages
-
Diamond Chain Saw
4 Pages
-
Hydraulic Breaker
2 Pages