Catalogs >
Stanley Infrastructure >
hydraulic post driver

hydraulic post driver
2Pages

Catalog excerpts

Post Driver The PD45 Post Driver is the most versatile tool of its type available. The standard PD45 will drive posts of almost any configuration, including “U” channel, round or square. Unlike other post drivers that simply rest on the top of the post, the PD45 lets the operator “index” the post in the tool. This gives improved control of the post and driver. It also reduces the damage to the top of the post. The PD45 features dual guiding handles, a lifting eye and multiple post adapters. The optional adapters allow the PD45 to be used on smaller posts of differnt shapes. The PD45 is offered in three trigger options; two have the trigger in the handle (Valve-in-Handle) and one has a remote on/off. Both trigger Valve-in- Handle models have an ON/OFF trigger adjacent to a guiding handle. The trigger extends the full length of the handle allowing the operator to activate the post driver at any position of its length. The trigger is “spring loaded” to the OFF position. The PD45131 is controlled by a remote on/off valve that allows the operator to position the post driver and control its operation from a valve that is remote from the driver. The PD45132G is specifically designed to meet State Department of Transportation (DOT) requirements for driving breakaway posts and delineators. It will drive posts to within 4 inches (100 mm) above ground level. PD45 Capacities PD45 without accessory adapters #2, #3 and #4 lb./ft. “U” Channel Sign Post #3 and #4 /Strong Back “U” Channel Sign Post #1 Delineator Post 2-1/2 in./63.5 mm Square Post 2-5/8 in./67 mm Round Post PD45 with accessory adapters 1 3/4" T-Post, 1 3/4" Square 2" Round pipe 2" Squate 2 1/4" Square OPERATION AND PERFORMANCE ITEM U.S.A. METRIC Capacity Refer to listing below Weight (Without Valve) 65 lb 29.5 kg Weight (With Valve) 67 lb 30.5 kg Length 30 in. 76 cm Width (Across Handles) 10-1/8 in. 25.7 cm Pressure 2000 psi 140 bar Flow Range 7-9 gpm 26-34 lpm Optimum Flow 8 gpm 30 lpm Porting - 8 SAE O-Ring Hose Whips Yes PD45131 On/Off Connect Size and Type 3/8 in. Pipe Remote Valve Hydraulic Tools PD45

Open the catalog to page 1

WARRANTY Stanley manufactured tools and their associated parts are warranted against defects in materials and workmanship for a period of twelve months from the date of purchase. Stanley reserves the right to repair or replace only those parts that prove to have been defective at the time of purchase. This warranty becomes void if maximum flow and pressure ratings are exceeded. ACCESSORIES PART NO. DESCRIPTION 67784 Adapter for 1-3/4” Round post (t-post) 15184 Adapter – 1-3/4" Square Post 15185 Adapter – 2" Round Pipe 15186 Adapter – 2-1/4" Square Post 15187 Adapter – 2" Square Post *...

Open the catalog to page 2