Catalogs >
Stanley Infrastructure >
HD45 underwater hammer drill

HD45 underwater hammer drill
2Pages

Catalog excerpts

underwater hammer drill Specifications Up to 2" diameter or 4" core bit 736 Skil hex Steel Capacity Open Center Circuit Type 7-9 gpm / 26-34 lpm Flow Range 8 gpm / 30 lpm Optimum Flow 1500-2000 psi / Working Pressure 105-140 bar Full Relief Setting 2250 psi / 155 bar 0 - 300 rpm Rotation Speed Weight 49 lbs / 22.2 kg (less tool bit) 24½" / 62.2 cm Length Width 14" / 35 cm (at handles) -8 SAE O-ring Hydraulic Ports Varies with model (See ordering Couplers information) Yes Hose Whips (3⁄8" NPT Male thread) Chuck Capacity The Stanley Hydraulic HD45 Hammer Drill is a heavy duty underwater model designed for drilling in concrete, rock and masonry. The feathering on/off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2" diameter hole up to 29" deep. Fluted drill bits require no water or air to clear holes. Ideal for drilling holes for setting anchor bolts. Painted hi-visibility yellow. Features • T-Handle with large on/off trigger for precise control • Stainless Steel spools and fasteners • Forward-Reverse with adjustable bit rotation speed • Feathering on/off valve allows easy start and control • Uses 736 Skil fluted carbide tipped drill bits - requires no water/air to clear holes • Drills ¾" to 2" diameter holes up to 29" deep and core drills up to 4" in diameter • Operates in any position • Trouble free drill steel latch retainer Stanley Hydraulic Tools | 3810 SE Naef Road | Milwaukie, Oregon 97267 | +01.503.659.5660 | 800.972.2647 | www.stanleyhydraulic.com 1/2011

Open the catalog to page 1

underwater hammer drill ordering information Part number Hammer Drill, Underwater, less couplers HD45310 HD4531001 Hammer Drill, Underwater, CE, Trigger Lock, with couplers important To fill out a Product Warranty Recording form and for information on your warranty visit stanleyhydraulic.com and select the Warranty tab. Flush-Face Coupling Set, 3⁄8" NPT Flush-Face Coupling Set, ½" NPT Dual Hose, 50' x ½", with couplers Dual Hose, 25' x ½", with couplers Twinned Hose, 25' x ½", with couplers Twinned Hose, 50' x ½", with couplers Carbide Bit, ¾" x 24" OAL Carbide Bit, 7⁄8" x 24" OAL Carbide...

Open the catalog to page 2