Catalogs >
Stanley Infrastructure >
DL07652 underwater drill

DL07652 underwater drill
2Pages

Catalog excerpts

underwater drill The Stanley DL07 hydraulic drill is a forward/reverse, variable speed drill with a ½" keyed chuck for underwater drilling applications. The DL07 has more than enough torque to drill most steel, masonry, wood or coral. A two position assist handle and trigger guard are standard. See chart below for speeds at select gpm of hydraulic flow. Painted hi-visibility yellow. Features • Integral Stanley Hyrevz gear motor produces high torque • Stainless Steel spools and fasteners • Forward-Reverse with variable speed • Dual position assist handle provides increased control • Oversized trigger with guard for operator comfort • Wiper seals on reversing and trigger spool • Built in reverse check valve ensures long seal life • Plastisol handle for comfortable ergonomic grip • Forward position of handle provides better balance • Open Center/Closed Center-Dual Spool Feature • Cast-in lifting eye Chuck Capacity Flow Range Working Pressure Full Relief Setting Hydraulic Ports Hose Whips Stanley Hydraulic Tools | 3810 SE Naef Road | Milwaukie, Oregon 97267 | +01.503.659.5660 | 800.972.2647 | www.stanleyhydraulic.com 1/2011

Open the catalog to page 1

underwater drill ordering information Part number DL07652 Drill, Underwater, 1⁄2" Capacity, Assist Handle, less couplers important To fill out a Product Warranty Recording form and for information on your warranty visit stanleyhydraulic.com and select the Warranty tab. Flush-Face Coupling Set, 3⁄8" NPT Flush-Face Coupling Set, ½" NPT Dual Hose, 50' x ½", with couplers Dual Hose, 25' x ½", with couplers Twinned Hose, 25' x ½", with couplers Twinned Hose, 50' x ½", with couplers Adjustable Chuck and Adapter, ¾" square x ¾" ¾" Chuck, 3 JT taper , use 7⁄16" bits When hydraulic hose exceeds 100'...

Open the catalog to page 2