Catalogs >
Stanley Infrastructure >
Core Drill - CD10

Core Drill - CD10
2Pages

Catalog excerpts

Core Drill Features and Benefits The Stanley CD10 Core Drill is well suited for drilling concrete, masonry and asphalt materials. It can be operated freehand or mounted in an optional drill stand. The CD10 maintains speed regardless of drill load improving the life of the bits. The CD10 has a three-speed gearbox. this provides a speed selection to match the best speeds for the range of drill bits. Changing speeds is easily done with the speed selector on the drill. The gearbox is equipped with a clutch to protect the gear set from overload while delivering torque sufficient for the larger bits. SPECIFICATIONS !! " # # $% ## ! ITEM U.S.A. METRIC CAPACITY 5/8 to 6-3/8 in. Bits 15 to 160 mm Bits PERFORMANCE 380, 900 and 1800 rpm FLOW RANGE 5.8 - 13 gpm 22 - 50 lpm PRESSURE 1000 - 2000 psi 69 - 140 bar SPINDLE CONNECTION 1-1/4 UNC male, 1/2 UNC female SYSTEM TYPE Open Center WEIGHT 18.7 lbs 8.5 kg LENGTH 19.3 in. 490 mm MAX WATER PRESSURE 60 psi 4 bar CONNECTION 3/8 in. Flush-Face Quick Disconnect Couplers WATER CONNECTION Gardena Quick Connect Coupler HOSE WHIPS Yes Water can be delivered either from a hydrant connection or from the 4-gallon pressure tank accessory. The water connection on the CD10 is fitted with a valve so the water can be controlled at the drill. A drilling aid is included to assist in starting freehand drilling without walk. Once the drill bit is started, the drilling aid can be moved out of the way. The drill stand has leveling screws to set the stand solidly on the surface to be drilled. A saddle clamp is available to attach the drill stand to concrete pipe 6 to 24 inches (150 to 600mm) in diameter. The drill stand can be adjusted to enable drilling holes at any angle from perpendicular to 45 degrees. The drill stand can be anchored to the material to be drilled by setting an anchor screw or by using a vacuum pump. The trigger can be locked ON to reduce operator fatigue. The trigger lock is released by simply squeezing the trigger. CD10

Open the catalog to page 1

WARRANTY Stanley Hydraulic Tools and their associated parts are warranted against defects in materials and workmanship for a period of twelve months from the date of purchase. Stanley Hydraulic Tools reserves the right to repair or replace only those parts which prove to have been defective at the time of purchase. This warranty becomes void if maximum flow and pressure ratings are exceeded. !! " # # $% ## ! All Stanley Hydraulic Tools, parts, accessories and allied equipment are subject to design improvements, specification and price changes at any time without notice and with no...

Open the catalog to page 2