Pneumatic Handtool for Speed Fasteners 7271 Model Features • High performance pneumatic handtool in heavy duty plastic • Robust and durable construction • High capacity, magazine fed fasteners • Uses same placing equipment as the 7530 tool • Can be suspended Benefits • High placement speed • Consistent actuation and hence joint formation • Reduced component handling and subsequent spillage • Pneumatically operated - no need for oil change • Suitable for most industrial environments Specifications Weight Pull Force @ 4.8 bar Cycle Time approx. Air Supply Pressure Free Air Volume @ 5.5 bar Noise Level Dimensions (mm/inch) 2.35 kg (5.2 lbs) 3.89 kN (875lbf) 2.4 sec 5 – 8 bar 1.72 litres < 70 dB(A) Placing capability All Speed Fasteners from diameter 2.4 mm (3/32") to 6.4 mm (1/4"). For detailed information on placing capability and nose equipment please refer to the tool manual on our website www.avdel-global.com or contact your local Avdel representative. Avdel UK Limited Pacific House, 2 Swiftfields Welwyn Garden City, Hertfordshire AL7 1LY Tel. +44 (0)1707 292-000 · Fax -199 [email protected] Data shown is subject to change without prior notice as a result of continuous product development and improvement policy. Your local Avdel representative is at your disposal should you need to confirm latest information.