Catalogs >
Stanhope-Seta >
Seta Reid Vapour Pressure Bath 22210-4

Seta Reid Vapour Pressure Bath 22210-4
1 / 1Pages

Catalog excerpts

Seta Reid Vapour Pressure Bath 22210-4 - 1

Seta Reid Vapour Pressure Bath 22210-4 ASTM D323 Procedures A & C & D; ASTM D1267; ASTM D4953 Procedure A; IP 69 PROCEDURES A & C & D; IP 410; BS EN ISO 4256 & BS 2000-410; BS ISO 3007 & BS 2000-69 ∞ Accepts up to 6 pressure cylinder assemblies ∞ Temperature range ambient +5 °C to 90 °C (194 °F) ± 0.1 °C ∞ Uniformity better than ± 0.1 °C @ 37.8 °C ( ± 0.2 °F @ 100 °F) ∞ Digital temperature control ∞ Low fluid level and over-temperature The Seta Reid Vapour Pressure Bath is a floor standing water bath specifically designed for the determination of vapour pressure with Seta Reid or Seta Vapour pressure cylinders. A programmable, digitally controlled thermostir unit combines the functions of heater, temperature controller, timer and stirrer. The thermostir unit is equipped with an RS 232 port, a switched output for an external relay, a socket for an external PT100 temperature probe and alarms and cut-outs for low fluid level and over-temperature. Specifications: °C Test Temperature Range: ambient +5 °C to 90 194(9 °F below ambient to °F) Supplied with: 4 pressure cylinder mounting brackets, mains lead, instruction manual Bath Volume: Bath Fluid: The 22210-4 will accept up to four 22410-0 and up to six 22400-0 Seta Vapour Pressure Cylinder / Ullage Chamber assemblies. Temperature Uniformity: Water (De-ionised) Cylinder Capacity: Size (HxWxD): Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: sales@stanhope-seta.co.uk

Open the catalog to page 1

Seta Reid Vapour Pressure Bath 22210-4 1 / 1Pages

Catalog excerpts

All Stanhope-Seta catalogs and technical brochures

Seta Reid Vapour Pressure Bath 22210-4
1 / 1Pages