Seta Block Heater ∞ Dry heating for samples ∞ 15°C to 130°C ∞ 4 tube capacity ∞ 999 minute timer ∞ Over temperature cut-off A processor controlled heater designed to be used in conjuction with a 90301-0 Block for heating centrifuge tubes. The heater has a temperature range of 15 to 130°C. The heater is equipped with a 1 to 999 minute countdown timer with buzzer, a temperature deviation alarm that can be set from 0.5 to 10°C allowable deviation, an external temperature probe socket and a delay start stop feature allowing the heater to be turned on or off after a predetermined time interval. The heater can be calibrated by the user over a wide temperature range. Suppled with: block extractor tool, maines lead and instruction manual. Specifications: Product Number: Temperature Range: Timer Range: Heater Power: Size (HxWxD): Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanh