Connex
2Pages

CONNEX®- couplings Stanelle – always the best solution For the economic connection and sealing of conveyor lines Areas of application: The Stanelle CONNEX pipe coupling system is designed for the safe, ecological, and cost saving connection and sealing of pneumatic conveyor lines. Pneumatic conveyor pipelines are subjected to heavy loading and therefore high abrasion. Conventional ange connections often cause turbulence in the bulk ow and therefore abrasion. The CONNEX pipe coupling centres the pipelines precisely and free of turbulence and at the same time provides a tight dust seal. An inset stainless steel strip safeguards potential equalisation against electrostatic build-up. Functionality: The conveyor lines for sealing are centred precisely and tack welded, and the tack welds ground down. The toothed gasket of the CONNEX coupling is placed around the pipe, and the screws in the outer housing engaged for a pressure tight seal. The toothed rubber gasket is available in various qualities and designs for assured permanent and dust tight connections.

Material and design: outer and inner skin of galvanised steel natural rubber/NBR gasket temperature range -30 °C to +110 °C grounding structure of stainless steel other sizes, gaskets, and designs on request Advantages: · dust tight connection · precisely centred pipeline joint · abrasion reducing connection · easy to install · no ange gaskets and no complex welding work arm for high tensile forces Dimensions and technical data: Outer pipe diameter (mm) CONNEX coupling length (mm) Number of screws Outer pipe diameter (mm) CONNEX coupling length (mm) Number of screws Outer pipe diameter (mm)...