*mydirectindustry

Catalogs
StandexMeder Electronics GmbH
MK17 SERIES REED SENSOR

MK17 SERIES REED SENSOR

1 / 2 PagesView full catalog

MK17 SERIES REED SENSOR

Product catalog summary

MK17 Series Reed Sensors Overview

Features: The MK17 series is supplied in Tape & Reel with J-Lead design, suitable for low power operations.
Applications: These sensors are used for on/off control switches, position detection, and as switching elements in various markets including appliances, telecommunications, security, and medical sectors.

Technical Specifications

Contact Data: Rated power is 10 W with a maximum switching voltage of 170 V and a maximum switching current of 0.5 A. The contact resistance is capped at 200 mOhm.
Performance: The breakdown voltage is 0.21 kVDC, with an operating time of 0.6 ms and a release time of 0.05 ms. Insulation resistance is typically 109 Ohm, and capacitance is 0.4 pF.

Design and Construction

Housing: Made from mineral-filled epoxy, the case is black. Lead designs include flat, straight leads for PCB slot mounting, bent SMD leads, and J-Leads.
Contact Forms: Available in Form A (Normally Open), Form B (Normally Closed), and Form C (Changeover).

Environmental and Handling Data

Environmental Resistance: Shock resistance is up to 30 g, vibration resistance up to 20 g, with an operating temperature range of -40 to 130 °C and storage temperature range of -50 to 130 °C.
Soldering: Maximum soldering temperature is 260 °C for 5 seconds. Reflow soldering conditions follow JEDEC norm J-STD-020D.1.
Handling Instructions: Proper lead clamping or heat sinking techniques are recommended to prevent mechanical and heat stress. Mechanical shock from dropping can alter magnetic sensitivity or damage the sensor.

Life Test Data

Load increases reduce the life expectancy of reed switches. Typical operations range from 1E+05 to 1E+10 depending on the load conditions.

Catalog excerpts

PARTNER | SOLVE | DELIVER' M" Standex W . Electronics Series Datasheet MK17 Series Reed Sensors > Features: Supplied in Tape & Reel, J-Lead, Excellent for Low Power Operations > Applications: On/Off Control Switch, Position Detection, Switching Element & Others > Markets: Appliance, Telecommunication, Security, Medical & Others Customer Options USA: +1 866.782.6339 | [email protected] EMEA:+49 7731/8399-0 | [email protected] APAC: +86 21/37606000 | [email protected]

Open the catalog to page 1

PARTNER | SOLVE | DELIVER' M" Standex W . Electronics Series Datasheet MK17 Series Reed Sensors Housing and Lead Specifications > Mechanical shock as the result of dropping the reed sensor typically from a distance of greater than 12" may change it's magnetic sensitivity and/or destroy the sensor > Reflow Soldering Conditions according to JEDEC norm J-STD-020D.1 Life Test Data Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the sense of technical progress are reserved. For general information only. For more specific information,...

Open the catalog to page 2

All StandexMeder Electronics GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list