*mydirectindustry

Catalogs
StandexMeder Electronics GmbH
MK02-6 SERIES REED SENSOR

MK02-6 SERIES REED SENSOR

1 / 2 PagesView full catalog

MK02-6 SERIES REED SENSOR

Product catalog summary

MK02/6 Series Reed Sensors Datasheet Summary

Features and Applications:

Designed for ferrous metal detection with front or above operation and through-hole technology (THT).
Applicable in door and window control, fire protection doors, safety and interlock sensing, among other uses.
Target markets include industrial and security sectors.

Technical Specifications:

Contact Data:
- Rated Power: Maximum 10 W.
- Switching Voltage: Maximum 170 V (DC or peak AC).
- Switching and Carry Current: Maximum 0.5 A (DC or peak AC).
- Contact Resistance: Maximum 200 mOhm at 0.5V & 50mA.
- Breakdown Voltage: Minimum 0.21 kVDC according to EN60255-5.
- Operating Time: Maximum 0.6 ms including bounce.
- Release Time: Maximum 0.05 ms with no coil excitation.
- Insulation Resistance: Typically 109 Ohm at 100V test voltage.
- Capacitance: Typically 0.4 pF at 10kHz across open switch.
Environmental Data:
- Shock Resistance: Maximum 50 g (1/2 sine wave duration 11ms).
- Vibration Resistance: Maximum 20 g.
- Operating and Storage Temperature: -30 to 70 °C.

Handling and Assembly Instructions:

Use proper lead clamping and heat sinking techniques to prevent mechanical and heat stress during soldering and welding.
Avoid mechanical shock from dropping the sensor to prevent failure.
A simple piece of iron is sufficient to activate the switching position.

Housing and Lead Specifications:

Housing Material: PBT Glass Fiber Reinforced.
Case Color: Black.
Sealing Compound: Polyurethane.

Glossary:

Magnetic Sensitivity: Ranges from 10-30 AT.
Contact Form:
- Form A: Normally Open (NO), Single Pole Single Throw (SPST).
- Form B: Normally Closed (NC), Single Pole Single Throw (SPST).
- Form C: Changeover, Single Pole Double Throw (SPDT).

Life Test Data:

Load increase reduces life expectancy of Reed Switches.
Typical number of operations varies with load, ranging from 1E+05 to 1E+10 depending on voltage and current.

Note: All technical specifications refer to the standard product range. Modifications for technical progress are reserved. For specific information, consult the product datasheet. Contact the nearest sales office for the most current specifications and products.

Catalog excerpts

PARTNER | SOLVE | DELIVER' M" Standex W . Electronics Series Datasheet MK02/6 Series Reed Sensors > Features: Ferrous Metal Detection, Front or Above Operation, THT > Applications: Door & Window Control, Fire Protection Doors, Safety & Interlock Sensing & Others > Markets: Industrial, Security & Others Customer Options USA: +1 866.782.6339 | [email protected] EMEA:+49 7731/8399-0 | [email protected] APAC: +86 21/37606000 | [email protected]

Open the catalog to page 1

PARTNER | SOLVE | DELIVER' M" Standex W . Electronics Series Datasheet MK02/6 Series Reed Sensors Housing and Lead Specifications > Use proper lead clamping/heat sinking techniques to prevent mechanical and/or heat stress during soldering & welding > Mechanical shock as the result of dropping the reed sensor may cause immediate or post-installation failure > Only a simple piece of iron is required to activate switching position Life Test Data Glossary Magnetic Sensitivity Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the...

Open the catalog to page 2

All StandexMeder Electronics GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list