*mydirectindustry

Catalogs
StandexMeder Electronics GmbH
MK01 SERIES REED SENSOR

MK01 SERIES REED SENSOR

Product catalog summary

MK01 Series Reed Sensors Overview

Features: The MK01 Series Reed Sensors are supplied in Tape & Reel with J-Lead configuration, making them excellent for low power operations.

Applications: These sensors are suitable for on/off control switches, position detection, and as switching elements in various markets including appliances, telecommunications, security, and medical sectors.

Specifications:

Rated Power: Maximum of 10W for any DC combination of voltage and current.
Switching Voltage: Maximum of 180V DC or peak AC.
Switching Current: Maximum of 0.5A DC or peak AC.
Carry Current: Maximum of 1.0A DC or peak AC.
Contact Resistance: Maximum of 150 mOhm at 0.5V & 50mA.
Breakdown Voltage: Minimum of 0.2 kVDC according to EN60255-5.
Operating Time: Maximum of 0.5 ms including bounce.
Release Time: Maximum of 0.05 ms with no coil excitation.
Insulation Resistance: Typical 10¹⁰ Ohm at 100V test voltage.
Capacitance: Typical 0.3 pF at 10kHz across open switch.

Environmental Data:

Shock Resistance: Maximum of 30g with 1/2 sine wave duration of 11ms.
Vibration Resistance: Maximum of 20g.
Operating Temperature: -20 to 130°C.
Storage Temperature: -35 to 130°C.
Soldering Temperature: Maximum of 260°C for 5 seconds.

Handling & Assembly Instructions: Proper lead clamping or heat sinking techniques should be used to prevent mechanical and/or heat stress during soldering and welding. Mechanical shock from dropping the sensor may alter its magnetic sensitivity or destroy it.

Life Test Data: The life expectancy of reed switches decreases with load increase. Typical number of operations varies with load conditions, ranging from 1E+05 to 1E+10 operations depending on the voltage and current applied.

Note: All technical specifications refer to the standard product range and are subject to change. For the most current specifications and product details, contact the nearest sales office.

Catalog excerpts

PARTNER | SOLVE | DELIVER' M" Standex W . Electronics Series Datasheet MK01 Series Reed Sensors > Features: Supplied in Tape & Reel, J-Lead, Excellent for Low Power Operations > Applications: On/Off Control Switch, Position Detection, Switching Element & Others > Markets: Appliance, Telecommunication, Security, Medical & Others Customer Options USA: +1 866.782.6339 | [email protected] EMEA:+49 7731/8399-0 | [email protected] APAC: +86 21/37606000 | [email protected]

Open the catalog to page 1

PARTNER | SOLVE | DELIVER' M" Standex W . Electronics Series Datasheet MK01 Series Reed Sensors Glossary Contact Form > Use proper lead clamping or heat sinking techniques to prevent mechanical and/or heat stress during, soldering, and welding > Mechanical shock as the result of dropping the reed sensor typically from a distance of greater than 12" may change it's magnetic sensitivity and/or destroy the sensor Housing and Lead Specifications

Open the catalog to page 2

Series Datasheet MK01 Series Reed Sensors Life Test Data Life Test Data *Load increase reduces life expectancy of Reed Switches *Load increase reduces life expectancy of Reed Switches Typical Number of Operations Typical Number of Operations Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the sense of technical progress are reserved. For general information only. For more specific information, please consult the product datasheet, available upon request. This series datasheet could contain technical inaccuracies or typographical...

Open the catalog to page 3

All StandexMeder Electronics GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list