*mydirectindustry

Catalogs
StandexMeder Electronics GmbH
LS02-S Series Data Sheet

LS02-S Series Data Sheet

Product catalog summary

Overview: The LS02 (Stainless Steel) Series Level Sensors are designed for level control, detection, and monitoring applications across various markets including automotive, appliances, HVAC/R, and test & measurement. Key features include IP68 protection up to the screw-in thread, operation up to 120°C, and a high power switch option.

Specifications:

Rated Power: Up to 100W depending on the switch model.
Switching Voltage: Maximum of 1000V for high voltage models.
Switching Current: Maximum of 1.0A for high voltage models.
Contact Resistance: Maximum of 150 mOhm.

Materials: The sensors are constructed with stainless steel for the stem, nut, and float, and nitrile rubber for the seal. Cable material is PVC.

Environmental Data:

Shock Resistance: Up to 50g.
Vibration Resistance: Up to 20g.
Operating Temperature: -40 to 160°C when cable is not moved, -40 to 120°C when cable is moved.
Storage Temperature: -20 to 100°C.

Handling & Assembly Instructions:

Maximum torque for nuts is 1Nm.
Cable bending-radius should be diameter x 15.
Minimum bending distance to housing is 5mm.
Avoid using magnetically inductive screws.
Series resistor recommended for cable lengths over 5m.

Life Test Data: The life expectancy of reed switches decreases with load increase. Typical number of operations varies based on voltage and current levels.

Note: The datasheet may contain inaccuracies or typographical errors and is subject to change. For the most current specifications, contact the nearest sales office.

Catalog excerpts

PARTNER | SOLVE | DELIVER' M" Standex W . Electronics Series Datasheet LS02 (Stainless Steel) Series Level Sensors NS- 75 -> > Features: IP68-only up to Screw in Thread, Up to 120°C, High Power Switch Option, Cables & Connectors > Applications: Level Control, Detection and Monitoring > Markets: Automotive, Appliance, HVAC/R, Test & Measurement Part Description: LS02-0X00-S-000X Contact Qty Customer Options

Open the catalog to page 1

PARTNER | SOLVE | DELIVER' M" Standex W . Electronics Series Datasheet LS02 (Stainless Steel) Series Level Sensors General Sensor Data Environmental Data Life Test Data Typical Number of Operations > Max torque of nuts 1Nm > Cable bending-radius is diameter x 15 > Min. bending distance to housing is 5mm > Decrease switching distance by mounting on iron > Do not use magnetically inductive screws > Series resistor recommended for > 5m cable length Life Test Data Typical Number of Operations KSK-1A85 Please note: All technical specifications on this series datasheet refer to the standard product...

Open the catalog to page 2

All StandexMeder Electronics GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list