*mydirectindustry

KT SERIES REED RELAY

Product catalog summary

Overview: The KT Series Reed Relays are designed for high voltage applications and are available in through-hole or SMD configurations. They are AEC-Q200 certified, making them suitable for use in automotive, photovoltaic, and battery management systems.

Features: These relays offer high dielectric strength and are capable of handling up to 1000 V switching voltage and 1.0 A switching current. They have a maximum contact resistance of 150 mOhm and a breakdown voltage of at least 3.0 kVDC.

Applications: The relays are used in inverters for photovoltaic collectors, automotive systems, and battery management systems, among other applications.

Technical Specifications:

Rated Power: 100 W
Switching Voltage: 1000 V (max)
Switching Current: 1.0 A (max)
Carry Current: 2.5 A (max)
Operating Time: 1.1 ms (max)
Release Time: 0.1 ms (max)
Insulation Resistance: 1010 Ohm (typical)
Capacitance: 0.5 pF (typical)

Environmental Specifications: The relays can operate in temperatures ranging from -40 to 100 °C and can be stored at temperatures between -40 to 125 °C. They are fully sealed for washability and can withstand a maximum soldering temperature of 260 °C for 5 seconds.

Handling & Assembly Instructions: Protective circuits are recommended to prevent damage from voltage and current peaks. External magnetic fields and mechanical shocks should be considered to avoid affecting the relay's performance.

Contact Forms: The relays are available in Form A (Normally Open), Form B (Normally Closed), and Form C (Changeover) configurations.

Coil Data: The relays are available with coil voltages of 5, 12, and 24 VDC, with corresponding coil resistances and nominal coil power specifications.

Contact Information: For sales and support, contact Standex-Meder Electronics in the USA, Europe, or Asia.

Catalog excerpts

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components Sgjje^laiasheet - KT Reed Relay Reed Relays > Features: High Voltage Through-Hole or SMD Relay, High Dielectric Strength, AEC-Q200 Certified > Applications: Inverters in Photovoltaic Collectors, Automotive, Battery Management Systems & Others > Markets: E-Cars, Solar & Others, Test & Measurement & Others Modifications in the sense of technical progress are reserved.

Open the catalog to page 1

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components Series Datasheet – KT Reed Relays Coil Data Contact Switch Form Model Unit 1A Nominal Coil Power (typ.) The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per °C. Relay Data Dielectric Strength Coil/Contact (min.) Operating Temperature Storage Temperature Soldering Temperature (max.) Insulation Resistance Coil/Contact (typ.) Rh<45%, 200V Test Voltage Shock Resistance (max.) 1/2 sine wave duration 11ms Fully Sealed Handling & Assembly Instructions Life Test Data *Load increase...

Open the catalog to page 2

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components Sgrje^laiasheet - KT Reed Relay Modifications in the sense of technical progress are reserved.

Open the catalog to page 3

All StandexMeder Electronics GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list