*mydirectindustry

DIP SERIES REED RELAY

Product catalog summary

Overview: This document is a datasheet for DIP Reed Relays, which are designed and manufactured by Standex-Meder. These relays are dual in-line IC compatible and are available with a dielectric strength of 4.25VDC. They are used in various applications such as general-purpose devices, measuring and testing devices, and are applicable in markets like telecommunications, test and measurement, and security.

Specifications:

Nominal Voltage: Options include 05, 12, 15, and 24 VDC.
Contact Quantity and Form: Available in 1 or 2 contacts with forms A, B, C.
Switch Models: 72, 75, 90 with various pin-out options.
Contact Data: Rated power is 10W, with maximum switching voltage ranging from 175V to 500V, and maximum switching current of 0.5A.
Coil Data: Coil voltage options are 05, 12, 15, and 24 VDC with varying coil resistance and nominal coil power.

Environmental Data:

Shock Resistance: Maximum of 50g.
Vibration Resistance: Maximum of 20g.
Operating Temperature: -20 to 70°C.
Storage Temperature: -35 to 95°C.
Soldering Temperature: Maximum of 260°C for 5 seconds.

Handling & Assembly Instructions:

Switching inductive or capacitive loads can create peaks that may damage the relay, requiring protective circuits.
External magnetic fields and high packing density can affect electrical characteristics.
Mechanical shock, such as dropping, can cause failure.
Wave soldering should not exceed 260°C for 5 seconds, and reflow soldering should follow solder paste manufacturer recommendations.

Glossary:

Form A: Normally Open Contacts (SPST).
Form B: Normally Closed Contacts (SPST).
Form C: Changeover (SPDT).

Catalog excerpts

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components Series Datasheet – DIP Reed Relays DIP Series Reed Relays Features: Dual In-Line IC Compatible Relay, Available with Dielectric Strength 4.25VDC Applications: General Purpose, Measuring and Testing Devices & Others Markets: Telecommunications, Test and Measurement, Security & Others Part Description: Nominal Voltage Contact Form Switch Model Option () Version with Magnetic Shield Customer Options Contact Data Switch Model Any DC combination of V&A not to exceed their individual max.’s Switching Voltage (max.) DC or peak AC Switching Current (max.) DC or peak AC Carry Current (max.) DC or peak AC Breakdown Voltage (min.) According to EN60255-5 Operating Time (max.) Incl. Bounce; Measured with w/ Nominal Voltage Release Time (max.) Measured with no Coil Excitation Insulation Resistance (typ.) Rh<45%, 100V Test Voltage Capacitance (typ.) @ 10kHz across open Switch │ [email protected] │ [email protected] │ [email protected]

Open the catalog to page 1

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components Series Datasheet – DIP Reed Relays Coil Data Contact Form Switch Model Nominal Coil Power (typ.) The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per °C. *Re-closure of Form B may occur if the max. coil voltage is exceeded. Coil polarity on Form B must be observed. Pin 2 is positive. () For Switch 1A75 **1B-75 only with Coil Voltage 24 available. Environmental Data Operating Temperature Storage Temperature Soldering Temperature (max.) 1/2 sine wave duration 11ms Handling...

Open the catalog to page 2

Series Datasheet - DIP Reed Rela A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components

Open the catalog to page 3

All StandexMeder Electronics GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list