Capture PE16ZU

Capture PE16ZU

Product catalog summary
Introduction
CAPTURE™ PE16ZU is a product by Standard Filter Corporation designed for fine particulate control, particularly PM2.5 emissions. It has earned the ETV verification stamp, indicating its high efficiency in non-membrane filters.

Performance Specifications
The filter demonstrates remarkable efficiency with an inlet dust concentration of 8.0 gr/dscf and an outlet particle concentration of 0.0000041 gr/dscf for PM2.5. This performance has been verified by the U.S. EPA.

Applications
CAPTURE™ PE16ZU is suitable for various operations, including Electric Arc Furnace, Metal Finishing, Pharmaceuticals, Foundry, and Gypsum Dust management, especially at temperatures below 275°F.

Cost Efficiency
Compared to PTFE membrane bags, CAPTURE™ PE16ZU offers a cost-effective alternative, providing high performance without the significant expense associated with membrane filters.

Contact Information
For more information, visit the official EPA website or contact Standard Filter Corporation at their Carlsbad, California office. They offer comprehensive resources in dust collection systems and filter media selection.

Features & Benefits
The document highlights the features and benefits of CAPTURE™ PE16ZU, emphasizing its efficiency, cost-effectiveness, and suitability for various industrial applications.
See more

Catalog excerpts

Capture PE16ZU -1

CAPTURE™ PE16ZU has earned the ETV verification stamp and is excellent for fine particulate control in operations such as: The CAPTURE™ PE16ZU efficiency performance is incredible for a non-membrane filter. Inlet Dust Concentration Outlet Particle concentration (PM2.5) 8.0 gr/dscf .0000041 gr/dscf For further information go to the official EPA website (www.epa.gov) CAPTURE™ PE16ZU CAPTURE™ PE16ZU – from Standard Filter Corporation is a revolutionary material specifically engineered to meet the challenges of PM2.5 regulations. The U.S. E P A has conducted performance verification testing of and has verified it for control of PM 2.5 particle emissions. Trying to get more performance out of your dust collector can. be an expensive proposition. The leap to higher efficiency PTFE membrane bags can set you back a small fortune, often 3-4 times what you had been paying for your bags previously. Most operating budgets can’t afford to absorb that for replacement filters. .F ortunately there is a low cost, high performance alternative... Electric Arc Furnace · Metal Finishing · Pharmaceuticals · Foundry Gypsum Dust · Fine Dust at temperatures below 275 degrees F° Inside USA - Toll Free - 1.800.634.5837 Outside USA - 760.929.8559 www.standardfilter.com Your Complete Resources in Dust Collection Systems & Filter Media Selection Standard Filter Corporation · 5928 Balfour Court · Carlsbad, California USA Phone: 760.929.8559 · Fax: 760.929.1901 · email: [email protected] Features & Benefits

 Open the catalog to page 1

All Standard Filter Corporation catalogs and technical brochures

  1. Wire Cages

    1  Page

  2. Airslides

    1  Page

  3. Hardware

    2  Pages

  4. Cartridges

    2  Pages

  5. Filter Bags

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.