- Catalogs
- Standard Bots
- Standard Bots RO1
Standard Bots RO1
Standard Bots RO1
- Performance: Power consumption varies from 25W to 1500W depending on program and payload.
- Operation: Collaborative or high-speed non-collaborative with speed and force limiting per ISO/TS 15066, collision detection, and other safety functions.
- Environmental Conditions: Ambient temperature range of 0-55°C and humidity at 90%RH (non-condensing).
- Physical Attributes: Payload capacity of 18kg, reach of 1.3m, max joint speed of 435°/s, and 6 degrees of freedom. The robot has a footprint of Ø 200 mm and weighs 32.5 kg including cable.
- Materials: Constructed from aluminum, steel, and plastic.
- Noise Level: Typically less than 58dB depending on the program.
- Mounting: Floor mount with ceiling/wall mount enabled via software update.
- Tool Connector: M8 8-pin & M8 4-pin.
- Gripper Support: Compatible with two-finger, three-finger, and suction grippers.
- Tool I/O Ports: Digital In: 2, Digital Out: 2, Analog In: 2, RS-485/UART max data rate: 10mbps.
- Tool Power Supply: 12V/24V, 3A continuous max.
- IP Classification: IP54.
- Size: 460 mm x 430 mm x 315 mm.
- Weight: 14.4kg.
- Materials: Powder coated steel.
- I/O Ports: Digital In: 16, Digital Out: 16, Analog In: 4.
- Communication: 24V I/O, TCP/IP, Modbus TCP, RS-485, USB 2.0, USB 3.0, CAN-FD.
- Power Source: 90 ~ 264VAC, 47-63Hz.
- Repeatability: +/- 0.025 mm.
- Joint Working Range and Speed: Shoulder 1 & 2: ±360°, max speed ±287°/sec; Elbow: ±360°, max speed ±335°/sec; Wrist 1, 2 & 3: ±360°, max speed ±435°/sec.
Catalog excerpts
Standard Bots RO1 Specs Performance Tooltip connector Power consumption Depends on program and payload; range from 25W to 1500W Collaboration operation Speed & force limiting per ISO/TS 15066, collision detection, and other safety functions Ambient temperature range Collaborative or high-speed non-collaborative Payload capacity Aluminum, steel, plastic Cable length, robot arm Weight, including cable Depends on program; typically less than 58dB Robot mounting Tool connector type Electrical and mechanical compatibility with largest gripper ecosystems Native gripper support Two-finger, three-finger, and suction grippers Digital Out: 2 (Open-drain or push-pull, 1A) Analog Out: 0 RS-485 / UART max data rate: 10mbps Tool power supply² Ambient temperature range Digital Out: 16 (24V 0.7A Out continuous) 24V 0.7A (3A combined if using internal power) 24V 0.7A (12A combined with external power supply) Analog In: 4 (24V Tolerant) Communication³ Modbus TCP Coming later this year via software update RS-485 (UART / Modbus), USB 2.0, USB 3.0, CAN-FD 90 Power source Powder coated steel Ceiling/wall mount enabled in software update Hardware supported. Software support coming later this year via software update More industrial protocols to be enabled via software update. Maximum speed: ±335°/sec Maximum speed: ±435°/sec
Open the catalog to page 1