Honeycomb Table Tops 1 Optical Tables 2 Brackets & Rails 4 5 Optical Positioners Base Positioners Translation & Rotation Stages 7 9 Motorised Positioners & Controllers 8 Fine Adjustment Screws OptoMechanics & Sets 10 Light Test & Measurement Instruments 11 The Concept of Closed Top Honeycomb Tables Real Closed Top – no way for liquids or tiny particles to get in. There are only the holes you do use. Make “new” holes by yourself. If You need a hole, clear it of the plug with a pencil or any similar item. Seal the no longer needed hole with the self-solidifying plastic mass again. In order to facilitate composition of optical schemes, we pre-set the plastic plugs of two colours, so that they form a coordinate grid with a mesh of 100 mm. pressure to a honeycomb core, using a special epoxy resin. Thickness of the skins depends on the dimensions of the table top. The top skin has a pattern (grid) of M6 holes spaced by 25 mm with ±0.1 mm accuracy. It allows to make very quick experimental setups, and, at the same time, ensures a high level of precision and reproducibility. The surface of the top skin is ground to flatness of ±0.1 mm over any 1 m² area over the entire surface. The bottom skin is coated in a firm decorative coating. Our standard honeycomb core is made of 0.25 mm corrosion-resistant plated sheet steel. A special composition of epoxy resin guarantees adhesion, rigidity, stability and damping corresponding to highest requirements. The side-walls of the table top are made of a special acoustically hollow plastic which damps acoustic vibrations. The side-walls are covered in a decorative black leather substitute. Upon request a Laser Port can be embedded in the table top allowing a laser beam to be let through the table (see the next page). The Honeycomb Table Tops 1HT have been mechanically and acoustically tested by qualified specialists. Honeycomb Table Tops 1HT provide the base on which precision optical and laser work is performed. The table tops have a honeycomb core inside. The table tops meet high requirements for rigidity, flatness, vibration isolation and damping. We work constantly to improve the design, weight and costeffectiveness of the table tops. Standard Honeycomb Tabletop 1HT consists of a 5 mm thick cold-rolled stainless ferromagnetic steel top skin, and 3-6 mm thick bottom skin, both bound under high Base Mounts & Accessories e-mail: [email protected] – Sandwich structure with steel honeycomb core – 5 mm ferromagnetic stainless steel top skin with a pattern of M6 holes spaced by 25 mm – Surface flatness ±0.1 mm over any 1m² area – Laser Port (optional – see the next page)

Honeycomb Table Tops Optical Tables Brackets & Rails 4 Optical Positioners 5 Acceleration curve for 1HT12-24-20 Table Top 6 Translation & Rotation Stages 7 Our company produces table tops according to customer’s specifications. Compliance curve for 1HT12-24-20 Table Top Fine Adjustment Screws 9 OptoMechanics & Sets 10 Light Test & Measurement Instruments 11 150 Laser Ports are ¨21 designed to lead a laser beam or cab­ les through a Tab­ le Top. The standard location of a port is chosen for use with the Laser Shelves 1LS52. To specify a Laser Port in your order please append letter “H” to the...

Optical Tables Base Mounts & Accessories 5 Optical Positioners Base Positioners Translation & Rotation Stages 7 Custom sizes available on request Honeycomb Breadboards Light Test & Measurement Instruments 11 Fine Adjustment Screws – Core – 265 kg/m³ 0.25 mm thick steel honeycomb – Top skin – 5 mm thick ferromagnetic stainless steel – Pattern of M6 holes spaced by 25 mm – Flatness ±0.1 mm/m² Honeycomb Breadboards 1HB provide a particularly effective way to expand the useful area of an optical table. The mounting surface has tapped M6 holes on 25 mm centers for permanent mounting of components....

Optical Tables Honeycomb Breadboards Brackets & Rails Optical Optical Tables Tables Bottom view for Honeycomb Breadboards up to 0.5 m² square surface or by request Custom sizes available on request Light Test & Measurement Instruments 11 Fine Adjustment Screws Motorised Positioners & Controllers 8 Translation & Rotation Stages 7 Base Positioners Optical Positioners Optical Mounts Honeycomb Breadboards 1HB Ordering Chart Base Mounts & Accessories e-mail: [email protected] A breadboard may be mounted on a table by silent rods 2SR-32 or 3MP25 Honeycomb Breadboards up to 0,5m2 have a grid of nine M6...

Optical Tables Solid Steel Breadboard - M6 tapped holes pattern Breadboard 1BS-2040-015 (former part number 1B82) is an alternative to the honeycomb table tops. particularly useful in small optical setups. 1BS-2040-015 is a steel plate, of one size. The plate is black chemically oxidized. The breadboard has grooves on all 4 sides, so you can quickly mount it using Table Clamps 3TC5, 3TC6. On the corners there are 4 holes for M6 screw used to mount directly to tables or to fix at a certain height ways to fasten a Breadboard Aluminium Breadboards Custom sizes available on request. Non-anodized...

Optical Tables Pneumatic Vibration Isolation System Air compressor is required for operation BB15V Light Test & Measurement Instruments 11 Vibration / Isolation performance Deflection “f” is minimal when the distance between supports = 0.554L Fine Adjustment Screws Motorised Positioners & Controllers 8 Translation & Rotation Stages 7 Base Positioners Optical Positioners Load/Pressure diagram P - required minimal pressure in atm (bar). Q - load per support leg (kg). Optical Mounts Height of the vibration isolation system Vertical movement range Precision of automatic level control Vertical resonance...

Optical Tables Pneumatic Vibration Isolation Workstation 1 Optical Tables 2 Brackets & Rails Base Positioners Motorised Positioners & Controllers 8 Translation & Rotation Stages 7 1VIS10 system can be optionally equipped with Castors, which are made of high-quality nylon, high abrasion resistant, smooth running performance on even floors, shock and impactresistant, corrosion-resistant. Laser shelves are optional breadboards. They save space when installing lasers and other equipment beneath honeycomb table tops. The shelf stays mechanically coupled to the table top. Fine Adjustment Screws OptoMechanics...