Base Positioners
10Pages

Base Positioners Multi-Axis Tilt Platform Optical Mounts Light Test & Measurement Instruments 11 Fine Adjustment Screws Motorised Positioners & Controllers 8 Translation & Rotation Stages 7 Base Positioners Optical Positioners ways to mount the unit Tilt Θy ±2° Rotation Θz ±2.5° Load capacity 15 kg Weight 1 kg bottom view Available Motorized version 8MTP116 Specifications Tilt y ±2° Rotation z ±2.5° Resolution in full step 1.25 µm in 1/8 step 0.156 µm Lead screw pitch 0.25 mm Repeatability 1 µm Maximum load capacity 10 kg Type of actuator 8CMA28-10 Cable 1.2 m length cable included Motor connector DB15(M) Weight 1.3 kg The mounting platform has a 25 mm grid of tapped holes M6 and M4. Two clearance holes ∅6.2 are provided in the base of the unit. This allows to attach 6TP116 to tables and breadboards. Also you can clamp the base of the unit by STANDA Table Clamp 3TC5; this way you can orient the unit on the table in any direction. The tilt platform is made of black anodized aluminium. Multi-Axis Tilt Platform 6TP116 provides angular ad­ustment about two-axis – j tilting and in-plane rotation. The mounting platform is rotated around kinematic pivot point by two micro­ me­ers. The out-of-plane t tilting range is ±2° and the in-pla­ e rotation ranges n is ±2.5°. Two micrometer screws are located side by side for a handy use. The adjustment movements are not calibra­ed, and they are t uncoupled. Base Mounts & Accessories Brackets & Rails e-mail: sales@standa.lt Optical Tables

Base Positioners Tilt/Rotation Stage Optical Tables Brackets & Rails Optical Mounts – in-plane rotation in the range of ±5° – tilt of two axis in the range of ±5° – precision screws are included – spring-loaded mounting clamp – stage could be easily mounted – maximal component height 38 mm Base Base Positioners Positioners Tilt Θx and Θy ±5° Rotation Θz ±5° Weight 0.23 kg Tilt / rotation stage 6PT110 provides two independent tilt adjustments within ±5° range and ±5° in-plane rotation adjustment. Precision screws provide 9 arcsec resolution in rotation and both tilt planes (adjustment screws...

Base Positioners Three Angle Prism/Beamsplitter Table 1 SPECIFICATIONS Tilt Θx and Θy ±4° Rotation Θz ±4° Sensitivity 8 arcsec Weight 0.43 kg Hole pattern 4×M6; 7×M4 Single-Axis Tilt Stage 6TS62 6TS A Single-Axis Tilt Stage 6TS provides tilt range of 6° with 6 µrad sensitivity. Pivot is done on two hardened steel balls. The base has M6 tapped holes on four sides, to fasten the platform, for example on mounting posts 3MP. Material – black anodized alumi­ nium. Weight: 6TS62 – 0.11 kg 6TS72-72 – 0.16 kg Examples of order codes 6TS62 (6TS72-72) fine driving screw 9S65M (comes as standard –...

Base Positioners Tilt Stage Optical Tables Brackets & Rails – Tip/tilt range of ±3° – Compatible with 7T25-10 series – Material: black anodized – aluminium Base Mounts & Accessories e-mail: sales@standa.lt Optical Mounts Optical Positioners 5 Base Base Positioners Positioners Motorised Positioners & Controllers 8 Roll & Pitch Tilt Platform Tilt Stage 6TS29-21 is combined with 7T25-10 Dovetail Linear Translation Stage Translation & Rotation Stages 7 Tilt Θx and Θy ±3° Load capacity 1.5 kg Weight 0.025 kg Fine Adjustment Screws 9 OptoMechanics & Sets 10 Light Test & Measurement Instruments 11...

Base Positioners Two-Axis tilt platforms Translation & Rotation Stages 7 Light Test & Measurement Instruments 11 Fine Adjustment Screws Motorised Positioners & Controllers 8 Base Positioners Optical Positioners Optical Mounts – Pitch yaw platform – Yaw ±4° – Pitch ±3° – Resolution 10 arcsec – Compatible with 7TF2 Base Mounts & Accessories for M3 screw for M4 screw 2 holes 4 holes e-mail: sales@standa.lt Optical Tables

Base Positioners Kinematic Bases for M6 screw clearance slot in a revolving disk Brackets & Rails for M4 screws 2 clearance holes for M6 screws clearance slot for M6 screws 4 clearance slots Fine Adjustment Screws 9 Light Test & Measurement Instruments 11 Material Aluminium Finish Black anodized Weight 0.36 kg lift lever Motorised Positioners & Controllers 8 Translation & Rotation Stages 7 Base Base Positioners Positioners for M6 screw clearance hole Magnetic Kinematic Base You lift the units mounted on the platform as a group. The platform is replaced with a repeatability of 50 µm. The...

We show only some examples of standard multi-axis assemblies. 6 Base Positioners Translation & Rotation Stages 7 Motorised Positioners & Controllers 8 Fine Adjustment Screws OptoMechanics & Sets 10 Light Test & Measurement Instruments 11 Optical Mounts Optical Positioners Base Mounts & Accessories Brackets & Rails We promptly produce custom connection plates and other accessories required for any non-standard assembly of 3 axis systems. Terms of delivery of the main items are not affected. At www.standa.lt you will find other X-Y-Z assemblies. e-mail: sales@standa.lt Optical Tables

Base Positioners Light Test & Measurement Instruments 11 Fine Adjustment Screws bottom view Motorised Positioners & Controllers 8 Translation & Translation & Rotation Rotation Stages Stages 7 Optical Mounts Base Mounts & Accessories Brackets & Rails e-mail: sales@standa.lt Optical Tables

Motorised Positioners & Controllers 8 Translation & Rotation Stages 7 Base Positioners Fine Adjustment Screws 6 Optical Positioners Base Mounts & Accessories Brackets & Rails Optical Tables e-mail: sales@standa.lt Light Test & Measurement Instruments 11 1