TECHNICAL DATASHEET STALOC POWER 703 2-component power adhesive STALOC POWER 703 adhesive has excellent impact, peel and tensile shear strength. The powerful adhesive offers excellent weather resistance. STALOC POWER 703 is quick to set and only requires little surface preparation. However, a gap of 0.5 to 1mm must be maintained to achieve optimal adhesion. STALOC® Flachenauergutstr. 8 • 4020 Linz AUSTRIA Tel.: +43/732/221877 • Fax: +43/732/222489 • [email protected] • www.staloc.com

Substrates The product is suitable for use on the following substrates: metal substrates: ■ aluminum (anodized, sanded, blank) ■ sheet metal ■ stainless steel ■ steel / casted steel parts (galvanized, sand-blasted, phosphated, chrome-plated, etc.) ■ non-ferrous metals (copper, brass, etc.) ■ painted metal surfaces plastics: ■ ABS ■ PA ■ PC and PMMA ■ Polyester ■ PUR ■ PVC ■ TPO composite and other substrates ■ fibre re-inforced plastics ■ EPDM / PP-EPDM ■ glass ■ stone, ceramics, marble, natural stone, basalt, etc. ■ wood Recommended application - further information can be found in the material...

The information and data in this document are for information purposes only. STALOC cannot take responsibility for the results obtained by a third party, whose methods are not under STALOC control. The determination of the suitability for the user’s purpose of any STALOC product is the responsibility of the client. Consequently, STALOC recommends testing of the products before using it for a series application. Moreover, it is the responsibility of the customer to ensure a safe environment for the user. STALOC therefore disclaims all warranties expressed or implied, including warranties of merchantability...