TECHNICAL DATASHEET STALOC 4S01 Instant bonder, universal Product description Fast hardening universal type for various applications Physical properties (when liquid) Values refer to reaching finger tight adhesion / final cure after 24 h Recommended application - further information can be found in the material safety data sheet The parts to be bonded need to be cleaned and degreased. It is recommended to use STALOC technical cleaners, in order to ensure the best results in terms of adhesion. STALOC instant adhesives obtain excellent results even when used with minimum gaps. Remove the residues of the glue with acetone-containing cleaners (e.g. STALOC Multi Power Cleaner) after pressing the parts together. In case you need to accelerate the curing (e.g. when gaps are higher) use the STALOC activator for instant adhesives. For materials with low surface tension which are difficult to bond (e.g. PE, PP, etc.) use the STALOC Primer for instant adhesiv for surface preparation. STALOC® Flachenauergutstr. 8 • 4020 Linz AUSTRIA Tel.: +43/732/221877 • Fax: +43/732/222489 • [email protected]

Storage Recommended storage for optimum shelf life Store product at an optimum temperature between 5°C and 25°C. Keep cool and dry. Make sure that the content is not contaminated once the bottle has been opened, in order to ensure an optimum shelf life. In case you need any further information, please contact the STALOC team. Please send your request for the latest version of the material safety data sheet (MSDS). The information and data in this document are for information purposes only. STALOC cannot take responsibility for the results obtained by a third party, whose methods are not under...