Connectors for battery packs CT-HE
12Pages

Connectors for battery packs CT-HE Railwayline | Industrial connectors

System description The connectors described in this docu- ment meet the specific requirements of components of our modular connector system CombiTac. CombiTac can complete the configurations presented in this document. In this case, a Configuration can have modules with or configuration is necessary, do not hesitate to without signal contacts Additional modules of the product range suited for the use in railway rolling stock. Special configurations are based on the modular connector system CombiTac, the railway industry and are particularly These connectors are based on the Small cables for...

Technical data General data, configurations Max. permissible mounting angular misalignment during mating Max. permissible mounting offset Degree of protection (unmated) Rated insulation voltage (UNm)   Power contacts Ø 12 mm Signal contacts Ø 1.6 mm Surge voltage (UNi) power contacts Ø 12 mm signal contacts Ø 1.6 mm Carrier material Power contacts material Signal contacts material Stainless steel Supporting rail Technical data, contacts Nominal Ø, Power contacts Nominal Ø, Signal contacts Operating temperature Mating cycles Norms Railway applications – Rolling stock – Electrical connectors,...

CombiTac combinations CombiTac CT-HE...2-12 Assembled, without contacts for 2 × Ø 12 mm Power Contacts Female configuration Male configuration sollte bevor Montageanleitung. mich unbedingt le- Ich beinhalte wertvolle wendet! aber zur korrekten Montage gut klein, ganz Assembly instructions MA091 www.staubli.com/electrical 4  Connectors for battery packs

CombiTac CT-HE...2-12+6-1,6 Assembled, without contacts for × Ø 12 mm Power Contacts 2 6 × Ø 1.6 mm Signal Contacts CT-HEB2-12+6-1,6 Female configuration Male configuration sollte bevor Montageanleitung. mich unbedingt le- Ich beinhalte wertvolle wendet! aber zur korrekten Montage gut klein, ganz Assembly instructions MA091 www.staubli.com/electrical Connectors for battery packs C

CombiTac CT-HE...2-12+12-1,6 Assembled, without contacts for   2 × Ø 12 mm Power Contacts 12 × Ø 1.6 mm Signal Contacts CT-HEB2-12+12-1,6 Female configuration Male configuration sollte bevor Montageanleitung. mich unbedingt le- Ich beinhalte wertvolle wendet! aber zur korrekten Montage gut klein, ganz Assembly instructions MA091 www.staubli.com/electrical 6  Connectors for battery

CombiTac CT-HE...4-12+12-1,6 Assembled, without contacts for   4 × Ø 12 mm Power Contacts 12 × Ø 1.6 mm Signal Contacts Same polarity of power contacts (pole 1 and 2 as well as pole 3 and 4 resp.) Female configuration Male configuration sollte bevor Montageanleitung. mich unbedingt le- Ich beinhalte wertvolle wendet! aber zur korrekten Montage gut klein, ganz Assembly instructions MA091 www.staubli.com/electrical Connectors for battery packs

Contacts Ø 12 mm Contacts For power contact carriers CT-HE... shown on page 4 to 7. Sockets fitted with Crimp termination (C) for Cu cable (class 5 and 6) Screw termination (S) using an M10 inside thread by means of a cable lug for Cu cable (class 5 and 6) Conductor cross section mm² sollte bevor Montageanleitung. mich unbedingt le- Ich beinhalte wertvolle wendet! aber zur korrekten Montage gut klein, ganz dT = 50 °K, see Derating-Diagram, page 11 drawings on pages 4 to 7 Assembly instructions MA091 www.staubli.com/electrical 8  Connectors for battery packs CT-HE

Ø 1.6 mm Contacts For signal contact carriers CT-HE... from For a “first mate / last break” function, lead- pages 4 to 7. Socket fitted with ing pin contacts are available on request. MULTILAM. Allows the Interlock function (“first break  last mate”), when combined with /  Crimp termination (C) for Cu conductors power contacts. sollte bevor Montageanleitung. mich unbedingt le- Ich beinhalte wertvolle wendet! aber zur korrekten Montage gut klein, ganz Conductor cross section Rated current Assembly instructions MA091 www.staubli.com/electrical Connectors for ba

Rated insulation voltage Rated insulation voltage (UNm) depending on pollution degrees and overvoltage categories (acc. EN 50124-1): Contact carrier Ø 12 mm Overvoltage category Contact carrier Ø 1.6 mm Overvoltage category The EN 50124-1 standard names four Pollution degree 1 (PD1): Either no overvoltage categories (OV) and four de- but with higher requirements with regard pollution or dry non-conductive pollution grees of pollution (PD) that describe the to safety, reliability and/or overvoltage environmental conditions to which the component is subjected, in this case the contact...

Panel mounted 1.  Max. permissible mounting offset Distance Z in mated condition Z = 25 mm0/+1 (with 1.6 mm contacts) Z = 25 mm0/+2 (without 1.6 mm contacts) 2.  Max. permissible mounting angular misalignment during mating Derating diagram For a 2 x Ø 12 mm power contacts configuration. Limiting current curve according to EN 60512-5-2 (2002) 500 450 400 Ambient temperature °C 1) Heating

Stäubli Units Global presence of the Stäubli Group www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. We reserve the right to modify product specifications without prior notice. © Stäubli 2018. ec.marcom@staubli.com | Photo credits: