video corpo

SPH/BA/CG Cooling and thermal management
12Pages

{{requestButtons}}

Catalog excerpts

SPH/BA/CG Cooling and thermal management - 1

Cooling and thermal management

Open the catalog to page 1
SPH/BA/CG Cooling and thermal management - 2

Combine resistance and lightweight… Fluids - glycol water - heat transfer oils - esters - cooling water - kerosene -… Applications - afe connection of the S cooling circuits under conditions of use with severe environmental constraints - n board material: planes, I civilian and military land vehicles - ooling of KERS systems C Non-spill flush faces to guarantee the integrity of the fluids and ensure the safety of installations and operators - o pollution enters the circuits on n connection - o contamination of the n environment due to fluid loss at disconnection. High resistance locking...

Open the catalog to page 2
SPH/BA/CG Cooling and thermal management - 3

... with performance and safety Secure disconnection Compact size and light weight is achieved by dedicated design and materials: high resistance aluminum alloys. By the combined action: push and twist of the plug in the socket. On request, a relief valve, socket side only, prevents any increase of pressure if, during storage, the circuit is exposed to a heat source. Wide range Automatic quick connection Just push the plug into the socket to make a secure connection. - 6 bore diameters - types of seals in accordance to 3 your fluids and applications - everal possible colours for easy s...

Open the catalog to page 3
SPH/BA/CG Cooling and thermal management - 4

Technical characteristics max. working temperature < 150 °C and all types of seals except Fluorosilicone seals (FMQ) max. working temperature < 150 °C and Fluorosilicone seals (FMQ) max. working temperatures > 150 °C and all types of seals socket, BSP male thread Bore diameter (mm) Max. working pressures (bar) Construction High resistance aluminum Types of seals Ethylene-Propylene (EPDM)

Open the catalog to page 4
SPH/BA/CG Cooling and thermal management - 5

Hydraulic flow rate / pressure drop charts Conditions of test: Direction of flow: plug Fluid: water Max. recommended flow rate Model Flow rate in l/mn at 5 m/s

Open the catalog to page 5
SPH/BA/CG Cooling and thermal management - 6

Sockets, BSP male thread G 1/8 with 60° cone Sockets, UNF – JIC 37° male thread Built-in sockets, UNF – JIC 37° male thread Plugs Plugs, BSP male thread Plugs, UNF – JIC 37° male thread UNF 7/16-20 DASH 4 UNF threads in accordance with ISO 8434-2 Visual identification of the circuits by colour sleeve All SPH 03, 05 and 08 sockets and plugs are available with a red coloured sleeve: replace the KJ code by the KR code in the part-numbers. Other colours available on request. Overall length socket / plug in connected position L = (L1 socket) + (L1 plug) - X Model

Open the catalog to page 6
SPH/BA/CG Cooling and thermal management - 7

Sockets, BSP male thread G 1/4 with 60° cone Sockets, UNF – JIC 37° male thread Built-in sockets, UNF – JIC 37° male thread Plugs Plugs, BSP male thread Plugs, UNF – JIC 37° male thread UNF threads in accordance with ISO 8434-2 Part-number construction: with Fluorosilicone (FMQ) seals: replace the Jx code by the JS3 code in the part-numbers above with Ethylene-Propylene (EPDM) seals: replace the Jx code by the JE code in the part-numbers above with Fluorocarbon (FPM ) seals: replace the Jx code by the JV code in the part-numbers

Open the catalog to page 7
SPH/BA/CG Cooling and thermal management - 8

Sockets, BSP male thread G 3/8 with 60° cone Sockets, UNF – JIC 37° male thread Built-in sockets, UNF – JIC 37° male thread Plugs Plugs, BSP male thread Plugs, UNF – JIC 37° male thread UNF threads in accordance with ISO

Open the catalog to page 8
SPH/BA/CG Cooling and thermal management - 9

Sockets, BSP male thread G 3/8 with 60° cone Sockets, UNF – JIC 37° male thread Plugs Plugs, BSP male thread Plugs, UNF – JIC 37° male thread UNF threads in accordance with ISO 8

Open the catalog to page 9
SPH/BA/CG Cooling and thermal management - 10

Sockets, BSP male thread G 1/2 with 60° cone Sockets, UNF – JIC 37° male thread Plugs Plugs, BSP male thread Plugs, UNF – JIC 37° male thread Ø 16 mm Sockets Sockets, BSP male thread G 3/4 with 60° cone Sockets, UNF – JIC 37° male thread Plugs Plugs, BSP male thread Plugs, UNF – JIC 37° male thread UNF threads in accordance with

Open the catalog to page 10
SPH/BA/CG Cooling and thermal management - 11

Possibilities of socket and plug assemblies 1/ On tube or flexible hose UNF - JIC 37° end connection in accordance with ISO 8434-2 standard Tube dimensions External tube Ø Inches BSP male thread with 60° cone Female thread swivel fitting 2/ On drill unit O-ring seal tightness O-ring seal part-numbers (should be ordered separately) End connection Type of seal Fluorosilicone Assembly with KES sealing kit G 1/2 Female thread with sealing groove KES sealing kit part-numbers (should be ordered separately) End connection Type of seal Fluorosilicone Comprising a treated aluminum retaining sleeve...

Open the catalog to page 11
SPH/BA/CG Cooling and thermal management - 12

Global presence of the Stäubli Group Stäubli units Agents International sales coordination Stäubli Faverges - CS 30070 - F - 74210 Faverges - Tel.: +33 4 50 65 67 97 - Fax: +33 4 50 65 60 69 - E-mail: connectors.sales@staubli.com www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 10/05/2015. Printed on FSC paper. We reserve the right to modify product specifications without prior notice. Photocredits: Stäubli. For contact details: www.staubli.com/connectors/co

Open the catalog to page 12

All Stäubli Fluid Connectors catalogs and technical brochures

  1. CER

    8 Pages

Archived catalogs