Catalogs >
Stäubli Fluid Connectors >
SPC multi-couplings Sequential injection

SPC multi-couplings Sequential injection
1 / 16Pages

Catalog excerpts

SPC multi-couplings Sequential injection

Centralised connections to improve injection control All the cleverness of a range specifically Flush face non spill design Centralised hydraulic energy preventing pollution of the work area and to optimise mould change times with a very short response time for hydraulic control circuits for easier and optimised control of New locking system design nozzle opening time 0.15 s*. *(value for information onlyfora 19.5 cm3 nozzle) Great exibility in use with systems that can be used for both existing and new pres

Open the catalog to page 2

SPC multi-couplings Sequential injection - 3

Registered Community Design Optimum safety provided by: Safe and fast connections and discon- connection in only one position, nections with simple rotation of the preventing any danger of a mistake by Centralised supply to hydraulic control lever. circuit inversion. cylinders controlling the opening tough ball locking, coupled with a and closing needles in sequential safety locking system with a injection circuits on hot channels. optimum ﬂow and excellent pressure resistance in a very small size. the foolproof keying system avoids any cross connection in the event of the use Compact...

Open the catalog to page 3

SPC multi-couplings Sequential injection - 4

2 major standards which can be modulated at will depending on the number of circuits to connect. Mould plate available in 3 versions, from 4 plugs (2 circuits) to 12 plugs (6 circuits). CAD files available on request from our sales network.

Open the catalog to page 4

SPC multi-couplings Sequential injection - 5

press SIDE press SIDE moulD SIDE possible configurations détection kit for use in these configurations

Open the catalog to page 5

SPC multi-couplings Sequential injection - 6

VERY COMPREHENSIVE AND MODULAR RANGE Options Integrated into the product upon order: see corresponding codes on pages 8 to 13. All options can be used together. Safety locking Reversed control lever ned in a single VS/LH version This option makes it possible for moulds VS/LH option triggered during connection, prevents with many circuits, to install 2 multi- This version combines locking safety with any plates from accidental disconnection, couplings side by side in a small space flexible operation and equipment design. even if the control lever is knocked. To whilst keeping the same...

Open the catalog to page 6

SPC multi-couplings Sequential injection - 7

Additional equipment to be ordered separately: see part-numbers on page 14. Parking plate Foolproof keying system equipped with a locking system for Enables all connection errors to be storage of the plate when not in use. avoided when using several plates on the Parking plate can be fitted with a proximity same mould.

Open the catalog to page 7

SPC multi-couplings Sequential injection - 8

Press equipment Number of Plate fitted nozzles with Number of Plate fitted nozzles with Socket positioning Socket positioning Options Add the corresponding option codes to the part-numbers above: ●●

Open the catalog to page 8

SPC multi-couplings Sequential injection - 9

Mould equipment Number of Plate fitted nozzles with Plug positioning Number of Plate fitted nozzles with Plug positioning * In case of fitting from the underside of the plate, the caps must be placed on the lateral tappings. Parking plate and foolproof keying system: see part-numbers Options and additional equipment shown on pages 6 and 7.

Open the catalog to page 9

SPC multi-couplings Sequential injection - 10

Press equipment Number of Plate fitted nozzles with Socket positioning Number of Plate fitted nozzles with Socket positioning Options Add the corresponding option codes to the part-numbers above: ●●

Open the catalog to page 10

SPC multi-couplings Sequential injection - 11

Mould equipment Number of Plate fitted nozzles with Number of Plate fitted nozzles with For JIC profile male thread, consult us. Plug positioning Plug positioning * In case of fitting from the underside of the plate, the caps must be placed on the lateral tappings. Parking plate and foolproof keying system: see part-numbers Options and additional equipment shown on pages 6 and 7.

Open the catalog to page 11

SPC multi-couplings Sequential injection - 12

Open the catalog to page 12

SPC multi-couplings Sequential injection - 13

Mould equipment Number of Plate fitted nozzles with Plug positioning Number of Plate fitted nozzles with Plug positioning For JIC profile male thread, consult us. * In case of fitting from the underside of the plate, the caps must be placed on the lateral tappings. Parking plate and foolproof keying system: see part-numbers Options and additional equipment shown on pages 6 and 7.

Open the catalog to page 13

SPC multi-couplings Sequential injection - 14

Additional equipment part-numbers To be separately ordered. Parking plate Plate models Proximity sensor option: add /DP code to the part-number. Foolproof keying kits Plate models Number of possible plates For optimal use of your multi-connection plates Stäubli offers, on simple request, drawings containing detailed information about plate assembly, circuit wiring, keying kit and sensors assembly as well as all the other options and additional equipments. Plate part-numbers Drawing part-numbers

Open the catalog to page 14

SPC multi-couplings Sequential injection - 15

Technical characteristics Nominal diameter DN (mm) Shut-off Fluorocarbon (FPM) seals as standard. Non-spill, flat face socket and plug. Proximity sensor 1 connector M12 + 5 m of 3 wire cable - Maximum allowable pressure PS (bar) : 100 - Minimum and maximum allowable temperatures TS (°C): -10 and +100 (1) Check that max. pressure and min./max. working temperatures of hoses, fitting pipes to the mould and of the connection are not exceeded. In case of partial use of the plates, make sure to distribute the inlet/outlet circuits so as to balance the pressures on either side of the locking...

Open the catalog to page 15

SPC multi-couplings Sequential injection - 16

Stäubli Units Representatives / Agents Global presence of the Stäubli Group www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 11/10/2022. We reserve the right to modify product specifications without prior notice. Photo credits: Adobe Stock, Stäub

Open the catalog to page 16