Applications Machine tools : - Connection and disconnection of machining heads - Hydraulic clamping and palletisation… Cooling: - Inserts and modules on moulds - Electronics Perfectly designed… 5 diameters available: 3, 5, 8, 12 and 20 mm Flat faced Pollution-preventing flat faced design ensures fluid integrity - No introduction of air or contaminants into your circuits - No pollution of the working area - Cleaning facilitated before connection Reliability The SPC is designed for high frequency use of up to 1 million connections. Efficiency The SPC range is compact and guarantees an excellent...

© Product of TOS Kurim Company - www.tos-kurim.cz … to fully integrate with your machine Take up of misalignment on connection - A form of preguiding combined with an elasticated connection permits a take-up of misalignment between plug and socket on connection. - To ensure take up of misalignment on connection, the pocket centres must be within the diameter of circle a. Take up of all misalignment on connection Øa 3D files available on request, for perfect integration of the connections into your projects from conception. “Floating both sides” version “Rigidly installed plug” version Total stroke...

Technical data Nominal bore (mm) Max. Working pressure (bar) Connection force (N) Connection stroke (mm) Repulsion cross section (cm2) Volume of air introduced* at connection (cm ) Volume of liquid displaced (cm ) 3 - Socket side - Plug side Weight (g) - Socket - Plug in pocket - Screwed plug * These are not cumulative values: they decrease with the number of cycles. Operating temperatures depending upon the type of seal** Types of seal Operating temperatures Ethylene-Propylene (EPDM)*** For use outside the indicated temperature ranges: consult us. ** The minimal temperatures of use are given...

Hydraulic flow rate / pressure drop charts 08 SP C Test conditions - Fluid: hydraulic oil INVAROL FJ13 (H515) - Density: 833 Kg/m3 at 40° C - Viscosity: 13.4 cSt at 40° C Socket - Direction of flow: Plug Flow (l/min.) Flow (l/min.)

Installation 1 - SPC with socket and plug recessed into pocket D Drawing part-numbers* * For design and machining recessed pocket. Mechanical abutment required 2 - SPC with socket recessed into pocket and screwed plug B Screwed plug Drawing part-numbers* * For design and machining recessed pocket. Mechanical abutment required 3 - Installation tools Models Installation tools for screwed plug Extractions tools for socket

Plugs recessed into pocket Models CD option: sockets with a discharge valve (limit the residual pressures in the circuit) Recognizable product thanks to the visual identification manufactured on the front face of the product. Opened valve (see principal plan below) Retention zone Pressure (bar) Max. opening pressure in bar according to models (see board above) • Nitrile seals in standard • Other available seals: - Fluorocarbon (FPM) seal = add /JV code at the end of part-numbers above - Ethylene-propylene (EPDM) seal = add /JE code at the end of part-numbers above We reserve the right to modify...

Global presence of the Stäubli Group Stäubli units Agents International sales coordination Stäubli Faverges - CS 30070 - F - 74210 Faverges - Tel.: +33 4 50 65 67 97 - Fax: +33 4 50 65 60 69 - E-mail: [email protected] www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 27/10/2014. Printed on FSC paper. We reserve the right to modify product specifications without prior notice. Photocredits: Stäubli. For contact details: www.staubli.com/connectors/co