RMI quick-release coupling Temperature control

... for any flow Wide range 7 nominal diameters from 6 to 37 mm, to cover all your applications. Safe and quick locking Applications Leak tight during connection Hot and cold water, glycol The long profile of the plug ensures a water and heat transfer fluid perfect leak tight connection. A large number of locking balls or pins depending on the models. The long Immediate visual circuit identification locking ring – knurled up to RMI 16 – with Red and blue rings provide quick and a wide flange from RMI 20 – provides easy easy identification of your hot and cold handling for quick and easy connection...

Technical data Maximum allowable pressure PS (bar) - max. working temperature <150 °C - max. working temperature >150 °C Leak tight during connection Shut-off single double KES sealing kit KES sealing kits consist of a retaining Main parts in brass ring and an O-ring to create a perfect patible provided that the interface is Coupling release sleeve in stainless seal between the socket or the plug and its base. Presence of KES symbols, before thread type in reference table indicate: Male cylindrical GAS threaded Plug body: - in hardened stainless steel *K it to be ordered separately. For further...

Flow rate / pressure drop charts Test conditions: ● Fluid: Water ● Direction of flow: socket

Part numbers Sockets Designation Socket with shut-off valve for rubber hoses Part numbers Ø = hose internal diameter (mm) Socket 90° with shut-off valve for rubber hoses Ø = hose internal diameter (mm) Socket 135° with shut-off valve for rubber hoses Ø = hose internal diameter (mm)

Part numbers Sockets Designation Socket with shut-off valve female thread Socket 90° with shut-off valve female thread Socket 135° with shut-off valve female thread References are compatible with a KES sealing kit (to be ordered separately). (1) Shoulder locking ring: see page 14.

Part numbers Sockets Designation Socket with shut-off valve cylindrical BSP male thread ocket with shut-off valve S NPT male thread Part numbers Socket 90° with shut-off valve cylindrical BSP male thread References ordered with a KES sealing kit. (1) Shoulder locking ring: se

Part numbers Plugs Designation taper male thread * plugs fully recessed cylindrical male thread Part numbers References are compatible with a KES sealing kit (to be ordered separately).

Part numbers Plugs Designation Straight-through plug female thread Assembly with 2 parts ➞ Assembly with 2 parts ➞ * plugs fully recessed Straight through plug for rubber hoses Ø = hose internal diameter (mm) References are compatible with a KES sealing kit (to be ordered separately).

Part numbers Plugs Designation Self-sealing plug female thread Self-sealing plug NPT male thread Part numbers References are compatible with a KES sealing kit (to be ordered separately).

Part numbers Plugs Designation Self-sealing plug cylindrical BSP male thread Self-sealing plug cylindrical BSP male thread Self-sealing plug cylindrical BSP male thread L = (L1 socket + L1 plug) – X Model RMI 20 RMI 25 RMI 37 double shut-off RMI 37 single shut-off Overall length in coupled position References ordered with a KES sealing kit. Part numbers

Dimensions for recessed installation Designation Installation of fully recessed straight-through plugs, taper male thread Part numbers Installation of fully recessed self-sealing plugs, NPT male thread Required tapping Installation of fully recessed self-sealing plugs, cylindrical BSP male thread

Additional equipment RMI 09 bridge pieces Tube preparation Tube length L = (nominal distance E.g.: for a nominal distance of 100 mm: L = (100 - 20) ± 0.5 = 80 ± 0.5 Machining of the ends For an even more increased rationalization of your assemblies: ● reduction in the number of flow meters and reduced size ease of maintenance and flexibility of assembly Options Sealing Coloured rings Protective dust-caps Ethylene-Propylene (EPDM), Nitrile (NBR) and Perfluoroelastomer (FFKM) seals are available on all models. Replace the code JV by the corresponding code in the socket and plug part numbers: Add...

The Stäubli capability for fluid regulation Centralised circuit connections Stäubli offers a standard range of multi-couplings based on the same technology as the RMI mono-couplings. ● Up to 10 inlets / 10 outlets combined in a single compact system. Flexible hoses For equipping your cooling circuits Stäubli can offer you a complete selection of flexible hoses specially dedicated to your application: ● CALOREL-EC: EPDM hose for hot and cold water circuits CALOREL-S: Rubber hose for hot oil circuits CALORLOCK: NBR / PVC hose self-locking flexible hose for water circuits... You will find all detailed...

Stäubli Units Representatives / Agents Global presence of the Stäubli Group www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 10/11/2023. We reserve the right to modify product specifications without prior notice. Photo credits: Stäub