Compressed air applications Connectors | Railway

Connections: a key link in the railway transport chain Pantograph systems ¡¡ Pneumatic quick-release couplings Pneumatic quick-release couplings for air lines ¡¡ System of modular electrical connectors for power transfer Rheostats ¡¡ Modular power Control systems ¡¡ odular system M for the electrical connection of control or communication systems electrical connectors for inputs/outputs Draining, filling, fluid level checks ¡¡ ydraulic quick-release H couplingsfor tanks, sumps, gearboxes and motor axles Braking and suspension ¡¡ Pneumatic quick-release couplings for pressure readings and levelling...

Power converter / auxiliary converters / transformers ¡¡ uick-release mono or multi-connections for cooling on-board Q electronic circuits ¡¡ onnection solutions for laminated insulated bipolar busbars C ¡¡ nsulated and uninsulated fork connectors for quick I connections to bays ¡¡ in / socket assemblies for the quick connection of power P modules ¡¡ odular power electrical connectors for converter M inputs / outputs Trainset coupling systems ¡¡ ulti-pole electrical M connectors for extreme environments ¡¡ lectrical contacts for E automatic couplers Battery pack ¡¡ odular system for the electrical...

Go up a gear 3 couplings ranges to choose from: GPL, SPI/OS and RTD GPL couplings range Automatic connection Straight-through high flow Easy maintenance for the end user. Body to bogie and interbody Reduced assembly time of the train Global connection solutions Quick-release couplings also available Easy connections and disconnections directly assembled on hoses (see pages of the circuits even in difficult loca- Pneumatic connections for flanged-lubricating devices, braking circuits, etc. tions. Multi-connection solutions for Pneumatic quick-release couplings for air lines Chloroprene protection...

Technical characteristics GPL couplings Nominal diameter DN (mm) Maximum allowable pressure PS(1) (bar) Full flow Stainless steel and treated brass. Socket equipped with a Chloropren male threads. Sealing Nitrile seal (NBR) Minimum and maximum allowable temperatures TS End connection standards BSP parallel male thread with 60° cone: profile according to the ISO 8434-6 standard. Other possible pressures: consult us F or use outside the indicated temperature range: consult us. The working pressures and temperatures are given for the Stäubli socket / plug set only. It is essential to ensure that...

Flow rate / pressure drop charts Test conditions: - Inlet pressure: 6 bar - Direction of flow: socket

Part-numbers GPL sockets Dimensions (mm) Female thread GPL 15/PP Models: GPL 15/PP GPL 20/PP GPL33/PP BSP male thread according to the ISO 8434-6 standard (60° cone) Models: GPL 15/PP GPL 20/PP Taper male thread Models: GPL 15/PP GPL 20/PP Other end connections, consult us. Overall dimensions in coupled position: see page 15.

BSP male thread according to the ISO 8434-6 standard (60° cone) Taper male thread Other end connections, consult us. Overall length in coupled position L = (L1 socket + L1 plug) - X Model GPL 15 GPL 20 GPL 25 GPL 33

SPI/OS and RTD couplings range Long guiding of the plug into the Visual circuit identification with coloured rings (only available for for reliable sealing even in difficult condi- Body to bogie and interbody Complete connection solutions Semi-automatic connection flanged-lubricating devices, directly assembled on hoses (see pages Protected sealing and locking Pneumatic quick-release Chloroprene protection avoiding any Quick-release couplings also available penetration of external agents: water, Multi-connection systems for quick bogie connections Multi-connection solutions for Easy to handle...

Technical characteristics SPI/OS and RTD couplings Maximum allowable pressure PS(1) (bar) Full flow S PI/OS: Nitrile seals (NBR) parallel male threads. Other seals materials available depending Minimum and maximum allowable temperatures TS - 25 and + 80 °C (1) (2) End connection standards BSP parallel male thread with 60° cone: Coloured rings for visual circuit identification Only available for SPI 06/OS: ■■ Other possible pressures: consult us F or use outside the indicated temperature range: consult us. The working pressures and temperatures are given for the Stäubli socket / plug set only....

Flow rate / pressure drop charts Test conditions : - Inlet pressure: 6 bar - Direction of flow: socket

Part-numbers SPI/OS sockets Dimensions (mm) L1 Female thread Taper male thread BSP male thread according to the ISO 8434-6 standard (60° cone) Other end connections, consult us. Overall dimensions in coupled position: see page 17. * Coloured rings for visual identification of available circuits: cont

SPI/OS plugs Designation Female thread Taper male thread BSP male thread according to the ISO 8434-6 standard (60° cone) Other end connections, consult us. Overall dimensions in coupled position: see page 17. * Coloured rings for visual identification of available circuits: contact us.

Part-numbers RTD sockets Dimensions (mm) Female thread NPT 3/4 BSP male thread according to the ISO 8434-6 standard (60° cone) RTD plugs Designation Female thread BSP male thread according to the ISO 8434-6 standard (60° cone) Taper male thread Other end connections, consult us. Overall dimensions in coupled position: see page 17. * Coloured rings for visual identification of available circuits: contac

Overall length in coupled position L = (L1 socket + L1 plug) - X Model

Complete connection solutions Stäubli provide you with flexible Full equipped flexible hoses, according We are able to produce other types of hoses with or without protection complete flexible hoses according to against ballast impacts equip- These flexible hoses meet the specific requirements of railway vehicles. safety: each complete system supplied is submitted to a unit test for function and tightness. convenience, secure supply from a single source supplier. Others certifications on request. your requiremen