Mechanical quick mould clamping systems QMC 105 and QMC 106 Plastics industry

Flexible processes and optimum production times in the plastics industry Stäubli has been your partner for system solutions in the ­ lastics p industry for more than 50 years. We manufacture fluid and ­ e ­ nergy connectors, ensure that tools can be changed quickly ­ and develop tailor-made solutions to automate processes. ­ Stäubli high-performance robots also ensure the highest productivity when handling parts and reworking. Extensive research and development establishes the basis for the efficiency, capability and process reliability of our products. ­ Our innovative solutions to minimise...

Tool clamping – a matter of seconds Tool change times are a significant cost factor. Stäubli quick mould clamping systems enable you to improve productivity, increase flexibility and minimise response times. Stäubli provides you with the complete range of systems, from mechanical quick mould clamping systems to fully-automatic hydraulic or magnetic rapid clamping systems. You will receive the optimum solution for your requirements, always with the world-renowned quality and security of Stäubli. Stäubli mechanical rapid clamping systems Stäubli mechanical rapid clamping systems establish a secure...

QMC 105 Mechanical bayonet clamping system Functional principle When closing the injection moulding machine, the centring clamping rings that are mounted on the tool are inserted into the machine face plates centering the tool. Manually actuating the clamping lever clamps the tool securely to the machine. Application area This can be used on horizontal and vertical machines with a clamping force of up to 100 tonnes and tools weighing up to 1500 kg. Secure fastening During the clamping process, the clamping force that is g ­ enerated manually is restricted automatically. The hand lever is released...

Order numbers Set of tool side centring clamping rings (2 pieces) QMC 105.60 Set of machine side clamping plates (2 pieces) QMC 105.10 * he number of fastening screws varies according the size of the clamping system. T Special holes according to SPI and JIS standards are available on request. Optional assembly t

QMC 106 Mechanical bayonet clamping system Principle Function Centring clamping rings mounted on the mould tool are, on closure, inserted into locks on the machine face plate. Exact radial alignment of the tool in the machine is ensured by a centring pin. The mould tool is clamped securely to the machine by manual operation of the lever. Application suitability The QMC 106 mechanical bayonet clamping system is suitable for use on horizontal and vertical machines with a clamping force of up to 200 tonnes and tools weighing up to 2000 kg. Secure fastening An automatic safety lock prevents the tool...

Order numbers Set of tool side centring clamping rings (2 pieces) QMC 106.60 Set of machine side clamping plates (2 pieces) QMC 106.10 * he number of fastening screws varies according the size of the clamping system. T Special holes according to SPI and JIS standards are available on request. Optiona

Global presence of the Stäubli Group Stäubli units Agents International sales coordination Stäubli Faverges - CS 30070 - F - 74210 Faverges - Tel.: +33 4 50 65 67 97 - Fax: +33 4 50 65 60 69 - e-mail: [email protected] www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 03/12/2015. Printed on FSC paper. We reserve the right to modify product specifications without prior notice. Photocredits: Hans-Jürgen Herrmann For contact details: www.staubli.com/connectors/co